PROPRIETARY BÖHLER S607 Tool steels
Data updates
This material has 170 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER S607 Chemical Composition
Böhler Edelstahl, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY BÖHLER S607 Physical Properties
Temperature
This material has 170 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER S607 Heat Treatments
- Annealing: 770-840°C (1418-1544°F); Controlled slow cooling in furnace (10-20°C / h (18-36°F / h)) to approx. 600°C (1110°F), air cooling.
Stress relieving: 600-650°C (1112-1202°F); Slow cooling furnace. To relieve stresses set up by extensive machining or in tools of intricate shape. After through heating, hold in neutral atmosphere for 1 to 2 hours.
Hardening and tempering: 1190-1230°C (2174-2246°F), salt bath, vacuum. Preheating: 1st stage ~500°C, 2nd stage ~850°C, 3rd stage ~1050°C. Austenitising: 1190-1230°C, holding time after complete heating 80 seconds, maximum 150 seconds, to avoid material damage due to overheating. Quenching: oil, warm bath (500-550°C), gas.
550-570°C (1022-1058°F), furnace 1 hour per 20 mm material thickness (at least 1 hour). Slow cooling to room temperature. 3 tempering cycles recommended.
PROPRIETARY BÖHLER S607 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY BÖHLER S607 International Equivalent Materials
Showing 15 of 76 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 76 international equivalents?
See all 76 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 76Cross References
- 7Composition
- 7Mechanical Properties
- 16Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 62Total Suppliers