PROPRIETARY 410 Stainless Stainless steels
Data updates
This material has 405 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 410 Stainless Chemical Composition
Rolled Alloys, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY 410 Stainless Physical Properties
Temperature
This material has 405 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 410 Stainless Heat Treatments
- Heat uniformly to 649-760°C (1200-1400°F), remove from furnace and air cool. This should result in Brinell hardness about 187.
For maximum softness, heat to 816-899°C (1500-1650°F), furnace cool slowly to 593°C (1100°F), after which air cooling is permissible. Brinell hardness should be approximately 155.
Heat to 954-1010°C (1750-1850°F), soak at heat, and quench in oil.
Light sections will also harden by air cooling. 410 will harden to some degree when heated 816°C (1500°F) and over unless slowly cooled to below the critical temperature. Soak at heat at least one hour, longer for large sections, and air cool.
Tempering 410 in the range 399-566°C (750-1050°F) results in decreased impact toughness and somewhat reduced corrosion resistance.
PROPRIETARY 410 Stainless Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY 410 Stainless International Equivalent Materials
Showing 15 of 223 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 223 international equivalents?
See all 223 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 223Cross References
- 8Composition
- 49Mechanical Properties
- 14Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 1Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 109Total Suppliers