PROPRIETARY BÖHLER M310 ISOPLAST Stainless steels
Data updates
This material has 811 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER M310 ISOPLAST Chemical Composition
Böhler Edelstahl, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY BÖHLER M310 ISOPLAST Physical Properties
Temperature
This material has 811 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER M310 ISOPLAST Heat Treatments
- Hardening and Tempering: 1025-1050°C (1877-1922°F). For hardening hold at temperature for 15 to 30 min. An optional sub-zero treatment at -80°C (-112°F) can be applied after hardening. For highest corrosion resistance, temper once for a minimum of 2h at 250-350°C (482-662°F). For balanced toughness and hardness, temper twice for a minimum of 2h at 490-520°C (914-968°F) (without sub-zero treatment) or 480-510°C (896-950°F) (with sub-zero treatment). After each heat treatment step, material should be cooled down to approx. 30°C.
Stress relieving: 50°C (90°F) below last tempering temperature.
PROPRIETARY BÖHLER M310 ISOPLAST Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY BÖHLER M310 ISOPLAST International Equivalent Materials
Showing 15 of 472 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 472 international equivalents?
See all 472 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 472Cross References
- 5Composition
- 1Mechanical Properties
- 14Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 318Total Suppliers