PROPRIETARY 22MnB5 AM FCE Structural and constructional steels
Data updates
This material has 246 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 22MnB5 AM FCE Chemical Composition
Arcelor Mittal, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY 22MnB5 AM FCE Physical Properties
Temperature
This material has 246 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY 22MnB5 AM FCE Heat Treatments
- The recommended austenitizing temperature is 880°C. The temperature for the beginning of the quenching process (i.e. at the maximum cooling rate) is 750°C. Ac3 temperature is 860°C, for a heating rate of 5°C/s. Ac1 temperature is 750°C, and Ms (martensitic start) starting temperature is 400°C.
In a tensile test, after austenitization for 5 minutes at 850°C followed by water quenching, the structure of the sample obtained is entirely of the martensite type.
In the same test performed at 840°C, a few islands of residual ferrite can be observed, regularly distributed.
PROPRIETARY 22MnB5 AM FCE Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY 22MnB5 AM FCE International Equivalent Materials
Showing 15 of 125 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 125 international equivalents?
See all 125 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 125Cross References
- 8Composition
- 7Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 102Total Suppliers