ASTM A 564 S46910 Stainless steels
Data updates
This material has 77 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASTM A 564 S46910 Chemical Composition
A564/A564M: 2025 / Standard Specification for Hot-Rolled and Cold-Finished Age-Hardening Stainless Steel Bars and Shapes
Looking for full material performance data?
Free registration required • Instant access
ASTM A 564 S46910 Physical Properties
Temperature
This material has 77 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASTM A 564 S46910 Heat Treatments
- Solution treated at 1000-1120°C (1830-2050°F), cooled rapidly.
Hardening:
Time refers to minimum time material is at temperature and may be extended to obtain required ductility properties.
Unless otherwise noted, temperatures shown are suggested temperatures and may be varied to obtain required tensile properties.
Intermediate temperatures must meet the ductility requirements of the next highest suggested hardening or aging temperature, or both.
When air cooling is specified, gases other than air may be used.
CW 1/2 hard + aging: Heated at 475°C (890°F), held for 1h, cooled in air.
CW full hard + aging: Heated at 475°C (890°F), held for 1h, cooled in air.
ASTM A 564 S46910 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASTM A 564 S46910 International Equivalent Materials
Showing 9 of 17 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 17 international equivalents?
See all 17 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 17Cross References
- 11Composition
- 25Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 16Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 4Total Suppliers