ASTM A 473 S34800 Stainless steels
Data updates
This material has 189 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
ASTM A 473 S34800 Chemical Composition
A473: 2026 / Standard Specification for Stainless Steel Forgings
Looking for full material performance data?
Free registration required • Instant access
ASTM A 473 S34800 Physical Properties
Temperature
This material has 189 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
ASTM A 473 S34800 Heat Treatments
- Solution heat treatment: Consisting of heating the material to a minimum temperature of 1040°C (1900°F), followed by water quenching or rapid cooling by other means sufficient to prevent the formation of grain boundary carbides.
When specified, stabilization heat treatment in addition to the solution heat treatment which shall consist of holding the forgings at 845 to 955°C (1550 to 1750°F) for at least 1 h for each inch of section thickness with a minimum holding time of 2 h, followed by air-cooling or water quenching.
The stabilization heat treatment is not usually specified, unless these steels are intended for severely corrosive environments in the temperature range from 425 to 870°C (800 to 1600°F). When specified, the stabilization heat treatment shall be the final heat treatment and may be performed before machining.
ASTM A 473 S34800 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
ASTM A 473 S34800 International Equivalent Materials
Showing 15 of 150 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 150 international equivalents?
See all 150 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 150Cross References
- 10Composition
- 4Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 21Total Suppliers