B.S. 1.4335 Stainless steels
Data updates
This material has 778 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
B.S. 1.4335 Chemical Composition
EN 10088-1: 2023 / Stainless steels - Part 1: List of stainless steels
Looking for full material performance data?
Free registration required • Instant access
B.S. 1.4335 Physical Properties
Temperature
This material has 778 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
B.S. 1.4335 Heat Treatments
- Hot forming: 1150-850°C, air cooling;
+AT - Solution annealing: 1030-1110°C (If heat treatment is carried out in a continuous furnace, the upper part of the range specified should usually be preferred, or even exceeded). (The lower end of the range specified for solution annealing should be aimed at the heat treatment as part of further processing, because otherwise the mechanical properties might be affected. If the temperature of hot forming does not drop below the lower temperature for solution annealing, a temperature of 980°C is adequate as a lower limit for Mo-free steels, a temperature of 1000°C for steels with Mo contents up to 3 % and a temperature of 1020°C for steels with Mo contents exceeding 3 %), air or water cooling; Cooling sufficiently rapidly in order to avoid the occurrence of intergranular corrosion. - Hot working: 1150 - 850°C, air cooling. Annealing: 1030 - 1110°C, water or air cooling.
B.S. 1.4335 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
B.S. 1.4335 International Equivalent Materials
Showing 15 of 208 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 208 international equivalents?
See all 208 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 208Cross References
- 81Composition
- 146Mechanical Properties
- 19Physical Properties
- 8Heat Treatment
- -Metallography
- -Machinability
- 10Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 2Joints
- -Coatings
- 140Dimensions
- -Tribology
- 1Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 163Total Suppliers