PROPRIETARY Ovako 20NiCrMo2-2 Structural and constructional steels
Data updates
This material has 212 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Ovako 20NiCrMo2-2 Chemical Composition
Ovako Group, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Ovako 20NiCrMo2-2 Physical Properties
Temperature
This material has 212 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Ovako 20NiCrMo2-2 Heat Treatments
- Hot forming: 1200 to 1800°C, cooling slowly or in air; Annealing +A: 650t o 680°C, cooling slowly (15°C/h) until 600°C; Treating to ferrite-pearlite structure and hardness range +FP, stage 1: 950 to 1 000°C, cooling quickly to stage 2; Treating to ferrite-pearlite structure and hardness range +FP, stage 2: 640 to 660°C, keeping about 3 hours, after that cooling in air; Normalizing: 860 to 890°C, cooling in air; Stress relieving: 650 to 680°C, cooling in air; Carburizing: 880 to 980°C, cooling in air; Hardening: 840 to 880°C, quenching in oil or in water; Tempering: 150 to 200°C, cooling in air.
PROPRIETARY Ovako 20NiCrMo2-2 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Ovako 20NiCrMo2-2 International Equivalent Materials
Showing 15 of 124 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 124 international equivalents?
See all 124 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 124Cross References
- 8Composition
- 2Mechanical Properties
- 3Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 74Total Suppliers