PROPRIETARY CRYELSO 9Q Structural and constructional steels
Data updates
This material has 333 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CRYELSO 9Q Chemical Composition
Arcelor Mittal, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY CRYELSO 9Q Physical Properties
Temperature
This material has 333 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY CRYELSO 9Q Heat Treatments
- Water quenching and tempering treatment. Heating at 820°C minimum before quenching and tempering at 570°C minimum.
- Water quenching and tempering treatment. Heating at 820°C minimum before quenching and tempering at 570°C minimum.
Cold forming: if CDF (cold deformation ratio (%)) is < 5, no further heat treatment needed. 5 < CDF ≤ 10: stress relief heat treatment can be applied. For CDF > 10: quenching and tempering mandatory to regenerate mechanical properties.
Recommended stress relief / post weld heat treatment: soaking temperature 570°C ± 10°C, soaking time 2 min/mm of thickness with a minimum of 20 minutes.
Hot forming: a temperature not exceeding 1150°C is recommended. After hot forming the mechanical properties must be regenerated by quenching and tempering.
PROPRIETARY CRYELSO 9Q Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY CRYELSO 9Q International Equivalent Materials
Showing 15 of 154 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 154 international equivalents?
See all 154 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 154Cross References
- 24Composition
- 18Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 132Total Suppliers