PROPRIETARY BÖHLER K105 Tool steels
Data updates
This material has 231 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER K105 Chemical Composition
Böhler Edelstahl, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY BÖHLER K105 Physical Properties
Temperature
This material has 231 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY BÖHLER K105 Heat Treatments
- Annealing: 800 to 850°C (1472 to 1562°F); Slow controlled cooling in furnace at a rate of 10 to 20°C/hr (18 to 36°F/hr) down to approx. 600°C (1112°F)), further cooling in air.
Stress relieving: 650 to 700°C (1202-1292°F); Slow cooling in furnace; intended to relieve stresses set up by extensive machining, or in complex shapes. After through heating, hold in neutral atmosphere for 1 to 2 hours.
Hardening and tempering: 980 to 1010°C (1796-1850°F); Oil, salt bath from 220 to 250°C or 500 to 550°C (428 to 482°F or 932 to 1022°F), air, gas. Tools of intricate shape or with sharp edges should preferably be hardened in air or salt bath. Holding time after temperature equalization: 15 to 30 minutes. After hardening, tempering to the desired working hardness, see tempering chart.
PROPRIETARY BÖHLER K105 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY BÖHLER K105 International Equivalent Materials
Showing 15 of 100 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 100 international equivalents?
See all 100 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 100Cross References
- 7Composition
- 16Mechanical Properties
- 15Physical Properties
- 4Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 89Total Suppliers