PROPRIETARY CarTech TrimRite Stainless steels

Material group: Ferrous Alloys / Stainless steels
Country / Standard: PROPRIETARY

Data updates

Latest Update: 2019-03
Total number of updates: 5
Update History
2018-10 2018-06 2016-02 2014-09

This material has 127 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY CarTech TrimRite Chemical Composition

CRITERIA
VALUE
UNIT
CAS NUMBER
CRITERIA
C
VALUE
0.15 – 0.30
UNIT
%
CAS NUMBER
7440-44-0
CRITERIA
Cr
VALUE
13.50 – 15.00
UNIT
%
CAS NUMBER
7440-47-3
CRITERIA
Fe
VALUE
Balance
UNIT
%
CAS NUMBER
7439-89-6
CRITERIA
Mn
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-96-5
CRITERIA
Mo
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7439-98-7
CRITERIA
Ni
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-02-0
CRITERIA
P
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7723-14-0
CRITERIA
S
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7704-34-9
CRITERIA
Si
VALUE
val1
Full data available with free access View Complete Material Data
UNIT
%
CAS NUMBER
7440-21-3

Carpenter Technology Corporation, Product Data Sheets,

Looking for full material performance data?

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY CarTech TrimRite Physical Properties

Temperature

PROPERTY / VALUE
Modulus of Elasticity
190 — 215 GPa
Unlock full details
Full data available with free access View Complete Material Data
Electrical Resistivity
0.557 Ω∙mm²/m
Unlock full details
Full data available with free access View Complete Material Data
Density
7.61 — 8.1 kg/dm³
Unlock full details
Full data available with free access View Complete Material Data
Electrical Conductivity
val1
Full data available with free access View Complete Material Data
S/m
Unlock full details
Full data available with free access View Complete Material Data
Poisson Coefficient
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

This material has 127 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

PROPRIETARY CarTech TrimRite Heat Treatments

  • Annealing: Heat uniformly to 732-760°C (1350-1400°F) for 2-4 hours on heat - remove from furnace and cool to room temperature. The hardness will be approx. Rockwell B 88/90 or equivalent. For lowest hardness (Rockwell B 82/87) heat to 850°C (1560°F) 1-2 hours on heat, cool in the furnace at a rate not exceeding 28°C (50°F) per hour to 650°C (1200°F), and then remove from the furnace and cool in air to room temperature.

    Hardening: For the max. attainable hardness of Rockwell C 49/52 the alloy should be heated to 1040°C (1900°F) and rapidly cooled to room temperature by quenching in oil or by forced air or gas cooling. 15 minutes on heat at 1040°C (1900°F) is generally adequate for screws, clips, pins, wire and other small parts. A longer time (up to a max. of about 1 hour) is required for larger sections. When heat treating in a protective atmosphere, nitrogen or argon with a dew point no higher than -40°C (-40°F) is suggested. Dissociated ammonia is considered unsuitable because of the risk of nitriding the work and the resulting reduction in corrosion resistance.

    For bars: Hardened at 1038°C (1900°F) for half an hour, oil quenched. Tempered for 2 hours, air cooled.
    For strips: Hardened at 1038°C (1900°F) for half an hour, air cooled. Tempered for 2 hours, air cooled.

    Tempering: 1-2 hours at 177-204°C (350-400°F). When less than max. hardness is required parts may be tempered up to 316°C (600°F).

PROPRIETARY CarTech TrimRite Mechanical Properties

Temperature

PROPERTY / VALUE
Tensile Strength
607 — 1986 MPa
Unlock full details
Full data available with free access View Complete Material Data
Elongation, A
9 — 35 %
Unlock full details
Full data available with free access View Complete Material Data
Yield Strength, Rp0.2
345 — 1310 MPa
Unlock full details
Full data available with free access View Complete Material Data
Impact Energy
val1
Full data available with free access View Complete Material Data
J
Unlock full details
Full data available with free access View Complete Material Data
Reduction of Area
val1
Full data available with free access View Complete Material Data
%
Unlock full details
Full data available with free access View Complete Material Data
Rockwell Hardness (HR)
val1
Full data available with free access View Complete Material Data
Unlock full details
Full data available with free access View Complete Material Data

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

View Complete Material Data ›
Free registration required • Instant access

Free registration required • Instant access

Book A Demo

Optimize material selection for your application - Book A Demo

  • 10Cross References
  • 9Composition
  • 82Mechanical Properties
  • 9Physical Properties
  • 1Heat Treatment
  • -Metallography
  • -Machinability
  • 12Stress-Strain
  • -Formability
  • 3Fatigue
  • -Fracture
  • -Creep
  • -Joints
  • -Coatings
  • -Dimensions
  • -Tribology
  • -Corrosion
  • -Ageing
  • -Weatherability
  • -Irradiation
  • 1Total Suppliers