PROPRIETARY Carpenter Greek Ascoloy Stainless steels
Data updates
This material has 95 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Carpenter Greek Ascoloy Chemical Composition
Carpenter Technology Corporation, Product Data Sheets,
Looking for full material performance data?
Free registration required • Instant access
PROPRIETARY Carpenter Greek Ascoloy Physical Properties
Temperature
This material has 95 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PROPRIETARY Carpenter Greek Ascoloy Heat Treatments
- Annealing: processed by heating to 1300°F (704°C), holding at temperature approximately 4h ,and air cooling. The resultant hardness is approximately 280BHN. To obtain maximum softness and complete relief of stresses, a cyclic anneal is required. This treatment consists of heating to 1450°F (788°C) for 2 to 4 hours followed by furnace cooling to 800°F (427°C) and then air cooling to at least 200°F (93°C). The material is them reheated to 1250/1300°F (677/704°C) for a minimum of twelve hours and air cooled. The resultant hardness is approximately 255 BHN. Hardening: An austenizing temperature of 1700/1800°F (927/982°C) is generally used followed by quenching in eith3er oil or air depending upon section size and design. Heavy sections, or parts of intricate design are usually preheated at 1200/1400°F (649/760°C) prior to hardening. The resultant hardness is approximately 448/472 BHN Tempering: It should be done as soon as possible following the hardening treatment.
PROPRIETARY Carpenter Greek Ascoloy Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PROPRIETARY Carpenter Greek Ascoloy International Equivalent Materials
Showing 8 of 11 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 11 international equivalents?
See all 11 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 11Cross References
- 10Composition
- 40Mechanical Properties
- 17Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 5Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- 2Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 9Total Suppliers