SAE 51416 Stainless steels
Data updates
This material has 344 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
SAE 51416 Chemical Composition
SAE J 405: 1998 / Chemical compositions of SAE wrought stainless steels
Looking for full material performance data?
Free registration required • Instant access
SAE 51416 Physical Properties
Temperature
This material has 344 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
SAE 51416 Heat Treatments
- Product 9.52 mm and under and specimens 9.52 mm ± 0.25 mm thick cut from larger product shall have hardness not lower than 35 HRC, or equivalent after being heated to 996°C ± 14°C (1825°F ± 25°F), held at heat for 30 minutes ± 3 minutes and cooled at a rate equivalent to still air.
- Subcritical annealed: 705-730°C; Full annealed: 815-900°C; Hardened: 925-1010°C, quenching in oil or air.
SAE 51416 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
SAE 51416 International Equivalent Materials
Showing 15 of 175 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 175 international equivalents?
See all 175 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 175Cross References
- 17Composition
- 2Mechanical Properties
- 3Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 28Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 117Total Suppliers