PN 15HGM Structural and constructional steels
Data updates
This material has 263 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PN 15HGM Chemical Composition
PN-H-84030-02: 1989 / Structural alloy steel - Carburizing steel - Grades
Looking for full material performance data?
Free registration required • Instant access
PN 15HGM Physical Properties
Temperature
This material has 263 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PN 15HGM Heat Treatments
- Hardening in water at 840ºC then Tempering in air at 180ºC.
- The sample taken in long. direction: Hardening in oil and water at 840ºC then Tempering in air at 180ºC. Common HT: Heated for open die forging: 1100-850°C or for Die forging 1150-850°C; Softened at T= 650-700°C; Normalized at T= 860-900°C; Carbonized with powder at T=880-950°C or salt bath at T= 900-950°C or gas at T=880-950°C. Cooling in oil (water) or steam water at T=160-250°C or air; Hardened at T=860-900°C and cooled in water or oil or steam water at 160-250°C; Annealed at T=660-680°C than cooled in the furnace; Re-hardened at T=810-830°C, cooled in water (oil) or steam water at 160-250°C. Tempered at 150-200°C.
PN 15HGM Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PN 15HGM International Equivalent Materials
Showing 15 of 111 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 111 international equivalents?
See all 111 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 111Cross References
- 12Composition
- 39Mechanical Properties
- 3Physical Properties
- 3Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 95Total Suppliers