PN Grade 10 Structural and constructional steels
Data updates
This material has 9248 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
PN Grade 10 Chemical Composition
PN-H-84019: 1993 / Unalloyed wrought steel for case hardening and for quenching and tempering - Grades
Looking for full material performance data?
Free registration required • Instant access
PN Grade 10 Physical Properties
Temperature
This material has 9248 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
PN Grade 10 Heat Treatments
- Hardening in water at 910ºC then Tempering in air at 150ºC.
- Heated in the range 1100-850°C, cooled in the water, than normalized at 880-920°C, cooling in the air. Softened at 650-700°C, cooling in the air. Hardened in water or oil at 830-870°C. Carburized at 900-980°C, (carburizing temperature generally not exceed 950° C, for special technologies, for example in vacuum, apply higher carburizing temperature, e.g. 1020 to 1050°C), than cooled in 1.water or oil, 2.furnace or 3. in the air; Hardening B: 1. Core area at 880-920°C, 2.Carburized area at 780-820°C and 3.Centarline area in water or oil. Tempering 1h at 150-200°C.
PN Grade 10 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
PN Grade 10 International Equivalent Materials
Showing 15 of 353 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 353 international equivalents?
See all 353 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 353Cross References
- 67Composition
- 58Mechanical Properties
- 4Physical Properties
- 2Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 83Joints
- -Coatings
- 5Dimensions
- 1Tribology
- 8491Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 184Total Suppliers