JIS SBV1B Structural and constructional steels
Data updates
This material has 808 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
JIS SBV1B Chemical Composition
G 3119: 2023 / Manganese-molybdenum and manganese-molybdenum-nickel alloy steel plates for boilers and pressure vessels
Looking for full material performance data?
Free registration required • Instant access
JIS SBV1B Physical Properties
Temperature
This material has 808 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
JIS SBV1B Heat Treatments
- Steel plates of 6 ≤ t ≤ 50 mm, shall be subjected to normalizing, stress relieving annealing or both normalizing and stress relieving annealing. Steel plates may be delivered as rolled upon agreement between the purchaser and the manufacturer.
Steel plates of t > 50 mm shall be normalized.
Normalizing of steel plates of 100 ≤ t ≤ 150 mm may include accelerated cooling to obtain the specified mechanical properties. In this case tempering normalizing shall be followed by tempering at 595°C to 705°C.
Upon approval of the purchaser and manufacturer normalizing of the steel plates t < 100 mm may also include accelerated cooling to improve the toughness of the steel plate. In this case normalizing shall be followed by tempering at 595°C to 705°C after normalizing.
JIS SBV1B Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
JIS SBV1B International Equivalent Materials
Showing 15 of 93 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 93 international equivalents?
See all 93 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 93Cross References
- 13Composition
- 30Mechanical Properties
- 43Physical Properties
- 1Heat Treatment
- -Metallography
- -Machinability
- 3Stress-Strain
- 1Formability
- -Fatigue
- -Fracture
- 21Creep
- -Joints
- -Coatings
- 514Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 89Total Suppliers