UNI C50 Structural and constructional steels
Data updates
This material has 859 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
UNI C50 Chemical Composition
EN 10083-2: 1996 / Steels for quenching and tempering - Part 2: Technical delivery conditions for non alloy steels
Looking for full material performance data?
Free registration required • Instant access
UNI C50 Physical Properties
Temperature
This material has 859 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
UNI C50 Heat Treatments
- Hardening: 810-850°C (Temperatures at the lower end of the range are generally used for water, and those at the upper end for oil quenching. Time for austenitizing as a guide: at least 30 min.);
Quenching agent: Oil or water (Other quenching agents such as synthetic quenchants may also be used.);
Tempering: 550-660°C (Time for tempering as a guide: at least 1h.);
Normalizing: 830-870°C. - Austenitizing (quenching in water or oil): 810-850°C, t > 30 min. NOTE: The temperatures at the lower end of the range are generally applicable to hardening in water and those at the upper end for hardening in oil. Synthetic quenchants may also be used. Tempering: 550-660°C, t > 60 min. Normalizing: 830-870°C, t > 30 min.
UNI C50 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
UNI C50 International Equivalent Materials
Showing 15 of 362 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 362 international equivalents?
See all 362 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 362Cross References
- 83Composition
- 158Mechanical Properties
- 3Physical Properties
- 7Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- 10Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 6Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 230Total Suppliers