AFNOR NF X40CrMoVN16-2 Stainless steels
Data updates
This material has 184 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
AFNOR NF X40CrMoVN16-2 Chemical Composition
NF S 94-090: 2005 / Medico-surgical equipment - Materials for surgical instruments - Martensitic, precipitations hardening, austenitic and austeno-ferritic stainless steels
Looking for full material performance data?
Free registration required • Instant access
AFNOR NF X40CrMoVN16-2 Physical Properties
Temperature
This material has 184 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
AFNOR NF X40CrMoVN16-2 Heat Treatments
- Annealed: 800-850°C, air cool; QT - Air cooling or oil quenching: 1000-1050°C; temper: 150-200°C.
- Hot working (slowly cooling): 1200-1000°C
+A - Annealing (furnace or air cooling): 800-850°C
+QT - Quenching (oil cooling + deep freezing at -80°C): 950-1050°C, Tempering: at 180°C.
Hot formed conditions:
1U - Hot formed, not heat treated, not descaled.
1C - Hot formed, heat treated, not descaled.
1E - Hot formed, heat treated, mechanically descaled.
1D - Hot formed, heat treated, pickled, coated (optional).
1X - Hot formed, heat treated, rough machined.
1G - Hot formed, heat treated, descaled, rough machined or shaved in the case of rod.
Cold processed conditions:
2H - Finishes 1E, 1D or 1X, cold processed, coated (optional).
2D - Finish 2H, heat treated, pickled and skin- passed (optional), coated (optional).
2B - Finishes 1E, 1D or 1X, cold processed, mechanically smoothed.
2G - Finishes 2H, 2D or 2B, centreless ground, mechanically smoothed (optional).
P - Finishes 2H, 2D, 2B or 2G, specular polishing.
AFNOR NF X40CrMoVN16-2 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
AFNOR NF X40CrMoVN16-2 International Equivalent Materials
Showing 15 of 66 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 66 international equivalents?
See all 66 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 66Cross References
- 40Composition
- 8Mechanical Properties
- 16Physical Properties
- 5Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- -Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 49Total Suppliers