EN X1NiCrMoCu25-20-5 Stainless steels
Data updates
This material has 9018 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
EN X1NiCrMoCu25-20-5 Chemical Composition
EN 10088-3: 2023 / Stainless steels - Part 3: Technical delivery conditions for semi-finished products, bars, rods, wire, sections and bright products of corrosion resistant steels for general purposes
Looking for full material performance data?
Free registration required • Instant access
EN X1NiCrMoCu25-20-5 Physical Properties
Temperature
This material has 9018 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
EN X1NiCrMoCu25-20-5 Heat Treatments
- Solution annealed (+AT): 1100-1150°C (for guidance only), cooling sufficiently rapid in water or air.
- Heat treated at 250-425°C; Duration: 30 min to 4h; Air cooling; The optimum heat treatment conditions may be very different. The spring manufacturer shall choose those conditions answering the purpose; The heat treatment data refer to compression springs, torsion and tension (springs without initial tension); The lower temperature is recommended for extension springs with prestress.
EN X1NiCrMoCu25-20-5 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
EN X1NiCrMoCu25-20-5 International Equivalent Materials
Showing 15 of 292 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 292 international equivalents?
See all 292 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 292Cross References
- 180Composition
- 449Mechanical Properties
- 41Physical Properties
- 14Heat Treatment
- -Metallography
- -Machinability
- 36Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 34Joints
- -Coatings
- 159Dimensions
- -Tribology
- 7535Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 278Total Suppliers