EN 20MnB5 Structural and constructional steels

Material group: Ferrous Alloys / Structural and constructional steels

Country/Standard: European Union / EN

Data updates

Latest Update: 2021-12

Total number of updates: 2

Update History

2018-09

This material has 603 properties — only a subset is shown here.

Unlock full material properties, including detailed values across temperatures and conditions.

EN 20MnB5 Chemical Composition

CRITERIA

VALUE

UNIT

CAS NUMBER

CRITERIA

VALUE

0.0008 – 0.0050

UNIT

CAS NUMBER

7440-42-8

CRITERIA

VALUE

0.17 – 0.23

UNIT

CAS NUMBER

7440-44-0

CRITERIA

VALUE

1.10 – 1.40

UNIT

CAS NUMBER

7439-96-5

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7723-14-0

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7704-34-9

CRITERIA

VALUE

val1

UNIT

CAS NUMBER

7440-21-3

EN 10083-3: 2006 / Steels for quenching and tempering - Part 3: Technical delivery conditions for alloy steels

Looking for full material performance data?

EN 20MnB5 Physical Properties

Temperature

0 - 30°C

PROPERTY / VALUE

Modulus of Elasticity

190 — 210 GPa

Unlock full details

Density

7.67 — 7.86 kg/dm³

Unlock full details

Poisson Coefficient

0.27 — 0.3

Unlock full details

This material has 603 properties — only a subset is shown here.

Unlock detailed physical values across temperatures and conditions.

EN 20MnB5 Heat Treatments

Austenitizing (quenching in water): 880-920°C, (at least 30 min). NOTE: The temperatures at the lower end of the range are generally applicable to hardening in water and those at the upper end for hardening in oil. Synthetic quenchants may also be used; Tempering: 400-600°C, (at least 60 min); End quench test: 900±5°C.
Hardening: 880-920°C (Temperatures at the lower end of the range are generally used for water, and those at the upper end for oil quenching; Time for austenitizing as a guide: at least 30 min.);
Quenching agent: Water (When choosing the quenching agent, the influence of other parameters, such as shape, dimensions and quenching temperature, on properties and crack susceptibility, should be taken into account. Other quenching agents such as synthetic quenchants may also be used.);
Tempering: 400-600°C (Time for tempering as a guide: at least 60 min.);
End quench test austenitizing: 900 ± 5°C (Time for austenitizing as a guide: 30-35 min.). The given conditions are for guidance. However, the temperatures specified for the end quench test are mandatory.

EN 20MnB5 Mechanical Properties

Temperature

0 - 30°C

PROPERTY / VALUE

Yield Strength, Rp0.2

430 MPa

Unlock full details

Tensile Strength

540 MPa

Unlock full details

Elongation, A

14 %

Unlock full details

Reduction of Area

val1 %

Unlock full details

Impact Energy

val1 J

Unlock full details

Rockwell Hardness (HR)

val1

Unlock full details

Vickers Hardness (HV)

val1

Unlock full details

Need complete mechanical properties to make the right choice?

Get complete data on strength, hardness, fatigue, and more.

Optimize material selection for your application - Book a Demo

253 Cross References

26 Composition
33 Mechanical Properties
3 Physical Properties
10 Heat Treatment
3 Metallography
- Machinability

- Stress-Strain
- Formability
- Fatigue
- Fracture
- Creep

- Joints
- Coatings
44 Dimensions
- Tribology

- Corrosion
- Ageing
- Weatherability
- Irradiation

231 Total Suppliers