DIN C60R Structural and constructional steels
Data updates
This material has 812 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN C60R Chemical Composition
EN 10277-5: 2008 / Bright steel products - Technical delivery conditions - Part 5: Steels for quenching and tempering
Looking for full material performance data?
Free registration required • Instant access
DIN C60R Physical Properties
Temperature
This material has 812 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN C60R Heat Treatments
- Hardening: 800-840°C (Temperatures at the lower end of the range are generally used for water, and those at the upper end for oil quenching; Time for austenitizing as a guide: at least 30 min.);
Quenching agent: Oil or water (Other quenching agents such as synthetic quenchants may also be used.);
Tempering: 550-660°C (Time for tempering as a guide: at least 1h.);
End quench test austenitizing: 830 ± 5°C (Time for austenitizing as a guide: 30-35 min.);
Normalizing: 820-860°C. - Austenitizing (quenching in water or oil): 800-840°C, t > 30 min. NOTE: The temperatures at the lower end of the range are generally applicable to hardening in water and those at the upper end for hardening in oil. Synthetic quenchants may also be used. Tempering: 550-660°C, t > 60 min. A mandatory end quench test shall be carried out at 830+/- 5°C. Normalizing: 820-860°C, t > 30 min.
DIN C60R Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN C60R International Equivalent Materials
Showing 15 of 327 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 327 international equivalents?
See all 327 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 327Cross References
- 57Composition
- 189Mechanical Properties
- 3Physical Properties
- 7Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- 10Fatigue
- -Fracture
- -Creep
- -Joints
- -Coatings
- 6Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 213Total Suppliers