DIN 1.2713 Tool steels
Data updates
This material has 176 properties — only a subset is shown here.
Unlock full material properties, including detailed values across temperatures and conditions.
Free registration required • Instant access
DIN 1.2713 Chemical Composition
DIN 17350: 1980 / Tool Steels; Technical Conditions of Delivery
Looking for full material performance data?
Free registration required • Instant access
DIN 1.2713 Physical Properties
Temperature
This material has 176 properties — only a subset is shown here.
Unlock detailed physical values across temperatures and conditions.
Free registration required • Instant access
DIN 1.2713 Heat Treatments
- Soft annealing: Slowly heated at 650-700°C, held for several hours, slowly cooled, preferably in the furnace.
The soft annealing is most appropriate for machining and cold working and provides the most favorable initial structure for tool hardening.
Hardening: Heated at 830-870°C, held for 15-30 minutes, oil quenched.
Stress relief annealing: Slowly heated 650°C, held for 1-2 hours, slowly cooled in the furnace.
Steel is nitrided in salt baths, gas or powder. The nitriding layer thickness may be 0.01-0.3 mm depending on necessity and method and is usually 0.1 mm. - Hardening (quencing in oil): 830-870°C; Tempering: 500°C
DIN 1.2713 Mechanical Properties
Temperature
Need complete mechanical properties to make the right choice?
Get complete data on strength, hardness, fatigue, and more.
Free registration required • Instant access
DIN 1.2713 International Equivalent Materials
Showing 15 of 73 results.
Equivalence categories reflect chemical-composition and mechanical-property comparison — always verify suitability against the governing specification for your application.
Need the full list of 73 international equivalents?
See all 73 equivalent grades with detailed mapping by standard, producer and equivalence category.
Free registration required • Instant access
Optimize material selection for your application - Book A Demo
- 73Cross References
- 16Composition
- 3Mechanical Properties
- 4Physical Properties
- 5Heat Treatment
- -Metallography
- -Machinability
- -Stress-Strain
- -Formability
- -Fatigue
- -Fracture
- -Creep
- 8Joints
- -Coatings
- 3Dimensions
- -Tribology
- -Corrosion
- -Ageing
- -Weatherability
- -Irradiation
- 64Total Suppliers