This group of B.S. specifications covers carbon and alloy steel plates and forgings used in boilers and pressure vessels, high-strength low-alloy steels, heat-treatable steels, spring steels, sheets and strips. This article also contains standards for various types of steel pipes which specify requirements for high-temperature service, ordinary use, and special applications such as fire protection use. Specifications for steel tubes list standard requirements for boiler and superheater tubes, general service tubes, steel tubes in refinery service, heat exchanger and condenser tubes, mechancal and structural tubing. Steel casting specifications call out the standard properties for pressure purposes. Standards for tool steels, stainless, heat resisting and valve steels are also presented.
Review of B.S. Standards for steel consists of 3 volumes. It contains formally approved B.S. standard classifications, guides, practices, specifications, test methods and terminology and related material such as proposals.
Covers:
The following data are given for each standard: standard number and year, grade, chemical composition and mechanical properties (yield point, tensile strength, notch toughness). When deemed useful, steel type, manufacturing method, thickness of plate, heat treatment and other data are described.
This group of B.S. specifications covers carbon and alloy steel plates and forgings used in boilers and pressure vessels, high-strength low-alloy steels, heat-treatable steels, spring steels, sheets and strips. This article also contains standards for various types of steel pipes which specify requirements for high-temperature service, ordinary use, and special applications such as fire protection use. Specifications for steel tubes list standard requirements for boiler and superheater tubes, general service tubes, steel tubes in refinery service, heat exchanger and condenser tubes, mechancal and structural tubing. Steel casting specifications call out the standard properties for pressure purposes. Standards for tool steels, stainless, heat resisting and valve steels are also presented.
B.S. 29 | 1976 | Carbon steel forgings |
B.S. 970 Part 1 | 1991 | Carbon and carbon manganese steel, free cutting steel |
B.S. 970 Part 2 | 1983 | Alloy steels |
B.S. 970-Part 2 | 1988 | Spring steel |
B.S. 970 Part 3 | 1991 | Bright bars |
B.S. 1407 | 1970 | Silver steel |
B.S. 1429 | 1980 | Wire for springs |
B.S. 1449 | 1991 | Plate, sheet and strip |
B.S. 1501 Part 2 | 1988 | Plates for pressure vessels |
B.S. 1501 Part 3 | 1990 | Plates sheet and strips for pressure vessels |
B.S. 1502 | 1982 | Sections and bars for pressure vessels |
B.S. 1503 | 1989 | Forgings for pressure vessels |
B.S. 1504 | 1976 | Castings for pressure purposes |
B.S. 1506 | 1990 | Bolting material |
B.S. 1717 | 1983 | Tubes |
B.S. 2056 | 1991 | Wire for springs |
B.S. 2772 Part 2 | 1989 | Colliery haulage and winding equipment |
B.S. 2901 Part 1 | 1983 | Filler rods and wires for gas-shielded arc welding |
B.S. 2901 Part 2 | 1990 | Filler rods and wires |
B.S. 3059 Part 1 | 1987 | Boiler and super heater tubes |
B.S. 3059 Part 2 | 1990 | Boiler and super heater tubes |
B.S. 3073 | 1977 | Strip |
B.S. 3074 | 1989 | Seamless tubes |
B.S. 3075 | 1976 | Wire |
B.S. 3076 | 1989 | Bars |
B.S. 3072 | 1989 | Sheet and plate |
B.S. 3146 Part 2 | 1975 | Investment castings |
B.S. 3605 Part 1 | 1991 | Seamless tubes and pipes |
B.S. 3605 Part 2 | 1992 | Welded tubes and pipes |
B.S. 3606 | 1992 | Tubes for heat exchangers |
B.S. 6323 Part 1 | 1982 | Seamless and welded tubes |
B.S. 3100 | 1991 | Steel castings |
B.S. 3111 Part 1 | 1987 | Wire |
B.S. 3146 Part 1 | 1974 | Investments castings |
B.S. 3601 | 1987 | Pipes and tubes |
B.S. 3602 Part 1 | 1987 | Seamless, ERW and induction welded tubes |
B.S. 3602 Part 2 | 1991 | Submerged arc welded tubes |
B.S. 3603 | 1991 | Tubes for pressure purposes (at low temperatures) |
B.S. 3604 Part 1 | 1990 | Tubes for pressure purposes (at elevated temperatures) |
B.S. 3604 Part 2 | 1991 | Tubes for pressure purposes (at elevated temperatures) |
B.S. 4360 | 1990 | Plates, strip, sections, bars |
B.S. 4670 | 1971 | Alloy steel forgings |
B.S. 5216 | 1991 | Carbon steel wire for springs |
B.S. 6323 Part 1 | 1982 | Seamless and welded tubes |
B.S. EN 10025 | 1994 | Non alloy steels |
B.S. EN 10028-2 | 1992 | Flat products for pressure purpose (elevated temperatures) |
B.S. EN 10028-3 | 1992 | Flat products for pressure purpose (weldable fine grain steels, normalized) |
B.S. EN 10028-4 | 1993 | Flat products for pressure purpose (nickel alloyed, low-temperature properties) |
B.S. EN 10083-1 | 1991 | Heat-treatable steels |
B.S. EN 10083-2 | 1991 | Heat-treatable steels |
B.S. EN 10113-2 | 1993 | Weldable fine grained steels |
B.S. EN 10113-3 | 1993 | Weldable fine grained steels |
B.S. EN 10130 | 1991 | Cold rolled flat products for cold forming |
B.S. EN 10155 | 1993 | Steels with improved atmospheric resistance |
B.S. 4659 | 1989 | Carbon tool steel |
B.S. 970 Part 1 | 1991 | Wrought steel |
B.S. 970 Part 4 | 1970 | Valve steels |
B.S. 1554 | 1990 | Wire |
B.S. 2901 Part 5 | 1990 | Nickel and nickel alloy filler rods and wires |
B.S. 3059 Part 2 | 1990 | Boiler and super heater tubes |
B.S. 3071 | 1986 | Nickel-copper alloy castings |
Total Materia ist die führende Materialinformationsplattform, die die umfangreichsten Informationen über metallische und nichtmetallische Materialeigenschaften und andere Materialdaten bereitstellt.
All diese Informationen stehen in Total Materia Horizon zur Verfügung, dem ultimativen Informations- und Auswahltool für Werkstoffe, das einen unvergleichlichen Zugang zu über 540.000 Werkstoffen sowie zu kuratierten und aktualisierten Referenzdaten bietet.
Total Materia Horizon umfasst: