PROPRIETARY Uddeholm Skolvar 工具钢
材料组别:
黑色金属 / 工具钢
国家与地区/标准:
PROPRIETARY
数据更新
最新更新: -
更新总数: 0
PROPRIETARY Uddeholm Skolvar 化学成分
化学元素
数值
单位
CAS 编号
Uddeholms AB, Product Data Sheets,
需要完整的材料性能数据吗？
查看完整材料数据 ›
需要注册 • 立即访问
需要注册 • 立即访问
PROPRIETARY Uddeholm Skolvar 物理性能
PROPRIETARY Uddeholm Skolvar 热处理
- Soft Annealing
Protect the steel and heat through to 850°C (1560°F). Then cool in furnace at 10°C (20°F) per hour to 600°C (1110°F), then freely in air.
Stress Relieving
After rough machining the tool should be heated through to 650°C (1200°F), holding time 2 hours. Cool slowly to 500°C (930°F), then freely in air.
Hardening
Preheating temperature: 600 - 650°C (1110 - 1200°F) and 850 - 900°C (1560 - 1650°F). Austenitizing temperature: 1050 - 1150°C (1920 - 2100°F), normally 1050°C (1920°F) or 1130°C (2066°F). Holding time: 30 minutes (<1100°C) or 10 minutes (≥1100°C). Protect the tool against decarburization and oxidation during austenitizing.
Quenching Media
High speed gas/circulating atmosphere, vacuum furnace (high speed gas with sufficient overpressure). Temper the tool as soon as its temperature reaches 50 - 70°C (120 - 160°F). To obtain the optimum properties for the tool, the cooling rate should be as fast as possible with regards to acceptable distortion.
Tempering
Choose the tempering temperature according to the hardness required. Temper at least twice with intermittent cooling to room temperature. High temperature tempering >525°C (980°F) is recommended whenever possible. - Austenitizing temperature 1050°C (1922°F). Holding time 30 minutes.
根据您的应用场景优化材料选择 - 预约演示
- -交叉引用
- 6化学成分
- -机械性能
- 3物理性能
- 3热处理
- -金相组织
- -切削加工性能
- -应力-应变
- -成形性能
- -疲劳
- -断裂
- -爬行
- -焊接接头
- -涂层
- -尺寸
- -摩擦学
- -腐蚀
- -老化
- -耐候性
- -辐照
- -供应商总数