PROPRIETARY ATI 410 不锈钢
材料组别:
黑色金属 / 不锈钢
国家与地区/标准:
PROPRIETARY
数据更新
最新更新: 2021-10
更新总数: 2
更新历史
2016-12
PROPRIETARY ATI 410 化学成分
化学元素
数值
单位
CAS 编号
化学元素
C
数值
0.08 – 0.15
单位
%
CAS 编号
7440-44-0
化学元素
Cr
数值
11.5 – 13.5
单位
%
CAS 编号
7440-47-3
化学元素
Mn
数值
≤ 1.00
单位
%
CAS 编号
7439-96-5
Allegheny Technologies Incorporated, Product Data Sheets,
需要完整的材料性能数据吗？
查看完整材料数据 ›
需要注册 • 立即访问
需要注册 • 立即访问
PROPRIETARY ATI 410 物理性能
温度
PROPRIETARY ATI 410 热处理
- Annealing: heat to 815-842°C (1500-1550°F) and hold for one hour per inch of thickness and furnace cool to room temperature. A hardening heat treatment is necessary to bring out the maximum hardness and wear resistance. Since these materials absorb heat very slowly, they should be heated gradually and allowed to remain at temperature long enough to ensure uniform temperature in thick sections. For maximum strength, hardness, and corrosion resistance, slowly heat the alloy to 982°C (1800°F) and quench to room temperature in oil. For thin sections, air cooling can be substituted for the oil quench. If retained austenite is known to be present after the austenitizing and quench to room temperature, additional hardening response may be achieved by sub-zero cooling to about -73°C (-100°F). The as-quenched structure of fresh martensite is quite brittle and should be stress-relieved or tempered at approximately 204-260°C (400-500°F) to restore some ductility. During tempering between approximately 149°C (300°F) and 316°C (600°F), a relaxation of the martensite structure occurs whereby the volumetric stresses associated with the formation of martensite upon quenching are relieved. As a result, the martensite still exhibits its high hardness and wear resistance properties but some ductility is introduced at the loss of a few points of hardness.
PROPRIETARY ATI 410 机械性能
PROPRIETARY ATI 410 的全球近似对照材料
显示 10 条结果，共计 21 条。
材料牌号
标准
国家与地区 / 生产商
近似类型
近似对照材料反映了不同材料间化学成分的相似性和力学性能的相似性——请务必根据具体应用场景的适用标准和条件具体核实材料的适用性。
根据您的应用场景优化材料选择 - 预约演示
- 21交叉引用
- 7化学成分
- 28机械性能
- 12物理性能
- 1热处理
- -金相组织
- -切削加工性能
- 1应力-应变
- -成形性能
- -疲劳
- -断裂
- -爬行
- -焊接接头
- -涂层
- -尺寸
- -摩擦学
- -腐蚀
- -老化
- -耐候性
- -辐照
- 3供应商总数