ABS AB/A1 结构钢
材料组别:
黑色金属 / 结构钢
国家与地区/标准:
美国 / ABS
参考价格:
数据更新
最新更新: 2021-10
更新总数: 1
更新历史
ABS AB/A1 化学成分
化学元素
数值
单位
CAS 编号
化学元素
C
数值
≤ 0.50
单位
%
CAS 编号
7440-44-0
化学元素
Cu
数值
≤ 0.35
单位
%
CAS 编号
7440-50-8
化学元素
Mn
数值
0.40 – 0.90
单位
%
CAS 编号
7439-96-5
Rules for Materials and Welding, Part 2; Chapter 3 Section 7; Materials for Machinery, Boilers, Pressure Vessels, and Piping; Steel Machinery Forgings, American Bureau of Shipping, 2021
需要完整的材料性能数据吗？
查看完整材料数据 ›
需要注册 • 立即访问
需要注册 • 立即访问
ABS AB/A1 物理性能
ABS AB/A1 热处理
Cooling prior to heat treatment: After forging and before reheating for heat treatment, the forgings are allowed to cool in a manner to prevent injury and to accomplish transformation.
Annealing: The forgings are to be reheated to and held at the proper austenitizing temperature for a sufficient time to effect the desired transformation and then be allowed to cool slowly and evenly in the furnace until the temperature has fallen to about 455°C (850°F) or lower.
Normalizing: The forgings are to be reheated to and held at the proper temperature above the transformation range for a sufficient time to effect the desired transformation and then withdrawn from the furnace and allowed to cool in air.
Tempering: The forgings are to be reheated to and held at the proper temperature, which will be below the transformation range, but above 620°C (1150°F), and then to be cooled at a rate not exceeding 55°C (100°F)/h until temperature below 315°C (600°F) is reached.
Stress Relieving: Where heat treatment for mechanical properties is carried out before final machining, the forgings are to be stress relieved after machining at a temperature 28°C (50°F) to 55°C (100°F) below the previous tempering temperature, but in no case less than 540°C (1000°F). The cooling rate is not to exceed 55°C (100°F)/h until temperature below 315°C (600°F) is reached.
Retreatment: The manufacturer may re-heat treat the forging, but not more than three additional times.
ABS AB/A1 机械性能
ABS AB/A1 的全球近似对照材料
显示 2 条结果，共计 2 条。
材料牌号
标准
国家与地区 / 生产商
近似类型
近似对照材料反映了不同材料间化学成分的相似性和力学性能的相似性——请务必根据具体应用场景的适用标准和条件具体核实材料的适用性。
根据您的应用场景优化材料选择 - 预约演示
- 2交叉引用
- 7化学成分
- 25机械性能
- 3物理性能
- 1热处理
- -金相组织
- -切削加工性能
- -应力-应变
- -成形性能
- -疲劳
- -断裂
- -爬行
- -焊接接头
- -涂层
- -尺寸
- -摩擦学
- -腐蚀
- -老化
- -耐候性
- -辐照
- -供应商总数