ABS AB/A1 Aços estruturais e de construcão
Atualizações de dados
Este material conta com 38 propriedades — apenas uma parte está sendo exibida aqui.
Desbloqueie todas as propriedades do material, incluindo valores detalhados em diferentes temperaturas e condições.
Registro gratuito requerido • Acesso instantâneo
ABS AB/A1 Composição química
Rules for Materials and Welding, Part 2; Chapter 3 Section 7; Materials for Machinery, Boilers, Pressure Vessels, and Piping; Steel Machinery Forgings, American Bureau of Shipping, 2021
Precisa de dados completos de desempenho de materiais?
Registro gratuito requerido • Acesso instantâneo
ABS AB/A1 Propriedades físicas
Temperatura
Este material conta com 38 propriedades — apenas uma parte está sendo exibida aqui.
Desbloquear valores físicos específicos em diferentes temperaturas e condições.
Registro gratuito requerido • Acesso instantâneo
ABS AB/A1 Tratamento Térmico
Cooling prior to heat treatment: After forging and before reheating for heat treatment, the forgings are allowed to cool in a manner to prevent injury and to accomplish transformation.
Annealing: The forgings are to be reheated to and held at the proper austenitizing temperature for a sufficient time to effect the desired transformation and then be allowed to cool slowly and evenly in the furnace until the temperature has fallen to about 455°C (850°F) or lower.
Normalizing: The forgings are to be reheated to and held at the proper temperature above the transformation range for a sufficient time to effect the desired transformation and then withdrawn from the furnace and allowed to cool in air.
Tempering: The forgings are to be reheated to and held at the proper temperature, which will be below the transformation range, but above 620°C (1150°F), and then to be cooled at a rate not exceeding 55°C (100°F)/h until temperature below 315°C (600°F) is reached.
Stress Relieving: Where heat treatment for mechanical properties is carried out before final machining, the forgings are to be stress relieved after machining at a temperature 28°C (50°F) to 55°C (100°F) below the previous tempering temperature, but in no case less than 540°C (1000°F). The cooling rate is not to exceed 55°C (100°F)/h until temperature below 315°C (600°F) is reached.
Retreatment: The manufacturer may re-heat treat the forging, but not more than three additional times.
ABS AB/A1 Propriedades mecânicas
Temperatura
Precisa de propriedades mecânicas completas para fazer a escolha certa?
Acesse dados detalhados de resistência, dureza, fadiga e muito mais.
Registro gratuito requerido • Acesso instantâneo
ABS AB/A1 Materiais Equivalentes Internacionais
Exibindo 2 de 2 resultados.
As categorias de equivalência refletem a comparação da composição química e das propriedades mecânicas, sempre verifique a adequação do material em relação à especificação aplicável à sua aplicação.
Precisa da lista completa do 2 de equivalentes internacionais?
Veja todos as classes 2 equivalentes com mapeamento detalhado por norma, fabricante e categoria de equivalência.
Registro gratuito requerido • Acesso instantâneo
Otimizar seleção de materiais para sua aplicação - Agende uma demonstração
- 2Referências Cruzadas
- 7Composição
- 25Propriedades Mecânicas
- 3Propriedades físicas
- 1Tratamento térmico
- -Metalografia
- -Usinabilidade
- -Tensão-Deformação
- -Conformabilidade
- -Fadiga
- -Fratura
- -Rastejante
- -Junta
- -Revestimentos
- -Dimensões
- -Tribologia
- -Corrosão
- -Envelhecimento
- -Resistência às Intempéries
- -Irradiação
- -Total de Fornecedores