PROPRIETARY Uddeholm Caldie 工具钢
材料组别:
黑色金属 / 工具钢
国家与地区/标准:
PROPRIETARY
数据更新
最新更新: 2018-07
更新总数: 2
更新历史
2016-04
PROPRIETARY Uddeholm Caldie 化学成分
化学元素
数值
单位
CAS 编号
Böhler-Uddeholm AG, Product Data Sheets,
需要完整的材料性能数据吗？
查看完整材料数据 ›
需要注册 • 立即访问
需要注册 • 立即访问
PROPRIETARY Uddeholm Caldie 物理性能
PROPRIETARY Uddeholm Caldie 热处理
- Soft annealing: Protect the steel and heat through to 820°C (1510°F) wait for equalization of the temperature (equalization time related to the size of the tool). Then cool in the furnace at 10°C (20°F) per hour to 650°C (1200°F), then freely in air to room temperature;
Stress relieving: After rough machining the residual stresses should be relieved by tempering at 650°C (1200°F), holding time 2 hr. Cool slowly in the furnace to 500°C (930°F), then freely in air to room temperature;
Hardening: Preheating temperature: 600-650°C (1110–1200°F) and 850-900°C (1560-1650°F). In case of bigger dimensions (> 150 mm cross section) a third preheating step at 930°C (1700°F) is recommended. Austenitizing temperature: 1000-1050°C (1830-1920°F), normally 1020°C (1870°F), in case of bigger dimensions (>150 mm cross section) 1000°C (1830°F). Holding time: 30 min. after the tool is heated through. (Protect the part against decarburization and oxidation.);
Quenching media: Vacuum (high speed gas with sufficient overpressure minimum 2 bar). Martempering bath or fluidized bed at approx. 200-550°C (390-1020°F), forced air/gas. Temper the tool as soon as its temperature reaches 50-70°C (120-160°F);
Tempering: Choose the tempering temperature according to the hardness required by reference to the tempering graph below. Temper at least twice with intermediate cooling to room temperature. For high dimensional stability a minimum temperature of 540°C (1000°F) and three tempers is strongly recommended. If lowering the tempering temperature, it should not be below 520°C (970°F). When tempering twice the minimum holding time at temperature is 2 hours. When tempering three times the minimum holding time is 1 hour. - Austenitizing temperature 1025°C (1880°F). Holding time 30 mintues.
PROPRIETARY Uddeholm Caldie 机械性能
温度
根据您的应用场景优化材料选择 - 预约演示
- -交叉引用
- 6化学成分
- 21机械性能
- 12物理性能
- 2热处理
- -金相组织
- -切削加工性能
- 1应力-应变
- -成形性能
- -疲劳
- -断裂
- -爬行
- -焊接接头
- -涂层
- -尺寸
- -摩擦学
- -腐蚀
- -老化
- -耐候性
- -辐照
- 5供应商总数