PROPRIETARY DuyLos 2379 工具钢
材料组别:
黑色金属 / 工具钢
国家与地区/标准:
PROPRIETARY
数据更新
最新更新: 2014-01
更新总数: 1
更新历史
PROPRIETARY DuyLos 2379 化学成分
化学元素
数值
单位
CAS 编号
化学元素
C
数值
1.5000 – 1.6000
单位
%
CAS 编号
7440-44-0
化学元素
Cr
数值
11.0000 – 12.5000
单位
%
CAS 编号
7440-47-3
化学元素
Mn
数值
0.1500 – 0.4500
单位
%
CAS 编号
7439-96-5
Lucchini RS, Product Data Sheets,
需要完整的材料性能数据吗？
查看完整材料数据 ›
需要注册 • 立即访问
需要注册 • 立即访问
PROPRIETARY DuyLos 2379 物理性能
PROPRIETARY DuyLos 2379 热处理
- Normally supplied in the annealed condition with hardness values lower than 250 HB which guarantees excellent machinability. Soft annealing: at 850°C, rate of increase max 50°C/h, soaking time minimum 120 min from when the temperature settles, cooling slowly in furnace at max 25°/h to 600°C, then cooling at room temperature. Stress relieving at 650°C, rate of increase max 100°C/h, soaking time minimum 120 min from when the temperature settles, cooling slow in the furnace to 200°C, then cooling at room temperature. Hardening: recommended temperature I 1010 ÷ 1050°C, rate of increase 150°C/h, soaking time 15-30 minutes after stable temperature achieved, cooling at 350°C in salt bath, alternatively in oil, fully hardened hardness 62 ÷ 64 HRc. “Normal” hardening cycle where nitriding of the piece is not required. Tempering temperature depending on the mechanical characteristics required and on the austenitising temperature, soaking time 60 min every 25 mm of thickness in cooling at room temperature, cooling In air.
根据您的应用场景优化材料选择 - 预约演示
- -交叉引用
- 6化学成分
- -机械性能
- 10物理性能
- 1热处理
- -金相组织
- -切削加工性能
- -应力-应变
- -成形性能
- -疲劳
- -断裂
- -爬行
- -焊接接头
- -涂层
- -尺寸
- -摩擦学
- -腐蚀
- -老化
- -耐候性
- -辐照
- 1供应商总数