PROPRIETARY Micro-Melt M62 Alloy 工具钢
材料组别:
黑色金属 / 工具钢
国家与地区/标准:
PROPRIETARY
数据更新
最新更新: 2022-02
更新总数: 1
更新历史
PROPRIETARY Micro-Melt M62 Alloy 化学成分
化学元素
数值
单位
CAS 编号
化学元素
C
数值
≤ 1.30
单位
%
CAS 编号
7440-44-0
化学元素
Cr
数值
≤ 3.75
单位
%
CAS 编号
7440-47-3
化学元素
Fe
数值
余量
单位
%
CAS 编号
7439-89-6
Carpenter Technology Corporation, Product Data Sheets,
需要完整的材料性能数据吗？
查看完整材料数据 ›
需要注册 • 立即访问
需要注册 • 立即访问
PROPRIETARY Micro-Melt M62 Alloy 物理性能
PROPRIETARY Micro-Melt M62 Alloy 热处理
- Annealing: heat slowly to 843/871ºC (1550/1600ºF), hold until the entire mass is heated through, and cool slowly (do not exceed 11ºC [20 ºF] per hour) in the furnace to about 538ºC (1000ºF), after which the cooling rate may be increased. The annealed hardness should be approximately BHN 262/285 (HRC 26/31).
Hardening: preheat at 816/843ºC (1500/1550ºF) long enough to ensure a thorough soak. Austenitize at 1149/1204ºC (2100/2200ºF) for 3-10 minutes, then air, oil, or salt quench. For oil quenching, an interrupted quench is recommended. Parts should be oil quenched to approximately 538ºC (1000ºF), removed from the bath, and air cooled. Similarly, parts may be quenched into a salt bath held at 538ºC (1000ºF), equalized, and air cooled. Parts should be allowed to cool to below 66ºC (150ºF) prior to tempering.
Stress Relieving: heat slowly to 621/677ºC (1150/1250ºF), hold 1 to 2 hours, then cool in still air.
Tempering: the tempering temperature may be varied according to the desired hardness, but is usually in the range 538/593ºC (1000/1100ºF).
根据您的应用场景优化材料选择 - 预约演示
- -交叉引用
- 9化学成分
- -机械性能
- 5物理性能
- 1热处理
- -金相组织
- -切削加工性能
- -应力-应变
- -成形性能
- -疲劳
- -断裂
- -爬行
- -焊接接头
- -涂层
- -尺寸
- -摩擦学
- -腐蚀
- -老化
- -耐候性
- -辐照
- 1供应商总数