PROPRIETARY Vega Tool Steel Stale narzędziowe
Aktualizacje danych
Ten materiał ma 32 właściwości - tutaj pokazano tylko ich część.
Odblokuj pełne właściwości materiału, w tym szczegółowe wartości w różnych temperaturach i warunkach.
Wymagana bezpłatna rejestracja • Natychmiastowy dostęp
PROPRIETARY Vega Tool Steel Skład chemiczny
Carpenter Technology Corporation, Product Data Sheets,
Szukasz pełnych danych o właściwościach materiałów?
Wymagana bezpłatna rejestracja • Natychmiastowy dostęp
PROPRIETARY Vega Tool Steel Właściwości fizyczne
Temperatura
Ten materiał ma 32 właściwości - tutaj pokazano tylko ich część.
Odblokuj dostęp do szczegółowych wartości fizycznych w różnych temperaturach i warunkach.
Wymagana bezpłatna rejestracja • Natychmiastowy dostęp
PROPRIETARY Vega Tool Steel Obróbka cieplna
- Normalizing is not recommended; Annealing: Heat to 732/746°C and cool very slowly in the furnace at a rate of not more than 11°C per hour until the furnace is black. The furnace may then be turned off and allowed to cool naturally. This will produce a max. hardness of Brinell 235; Hardening: Heat the salt bath or furnace to 830/871°C, depending upon the size of the tool. Without preheating, place the tool in the hot furnace and let it heat "naturally" until it uniformly matches the color of the thermocouple in the furnace. Soak for 20 minutes at temperature, and an additional 5 minutes per 25.4 mm of thickness, then remove from the furnace and cool in a free circulating air. Using this practice, sections up to approx. 101.6 mm square will harden to about Rockwell C 61/63. Sections 203.2 mm square can be hardened as high as Rockwell C 60; Stress relieving: First rough machine, then heat to a temperature of 649/677°C, and cool slowly.
PROPRIETARY Vega Tool Steel Właściwości mechaniczne
Temperatura
Potrzebujesz kompletnych właściwości mechanicznych, aby dokonać właściwego wyboru?
Uzyskaj kompletne dane dotyczące wytrzymałości, twardości, zmęczenia i innych parametrów.
Wymagana bezpłatna rejestracja • Natychmiastowy dostęp
Zoptymalizuj dobór materiałów do swojego zastosowania - Umów się na prezentację
- 1Odniesienia
- 6Skład Chemiczny
- 11Właściwości Mechaniczne
- 12Właściwości Fizyczne
- 1Obróbka Cieplna
- -Metalografia
- -Obrabialność
- -Naprężenie-Odkształcenie
- -Plastyczność
- -Zmęczenie materiału
- -Pęknięcie
- -Pełzać
- -Złącza
- -Powłoki
- -Wymiary
- -Trybologia
- -Korozja
- -Starzenie
- -Odporność na warunki atmosferyczne
- -Napromieniowanie
- 1Łączna liczba dostawców