PROPRIETARY Vega Tool Steel Aceros para herramientas
Actualizaciones de datos
Este material cuenta con 32 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Vega Tool Steel Composición química
Carpenter Technology Corporation, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Vega Tool Steel Propiedades físicas
Temperatura
Este material cuenta con 32 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Vega Tool Steel Tratamiento Térmico
- Normalizing is not recommended; Annealing: Heat to 732/746°C and cool very slowly in the furnace at a rate of not more than 11°C per hour until the furnace is black. The furnace may then be turned off and allowed to cool naturally. This will produce a max. hardness of Brinell 235; Hardening: Heat the salt bath or furnace to 830/871°C, depending upon the size of the tool. Without preheating, place the tool in the hot furnace and let it heat "naturally" until it uniformly matches the color of the thermocouple in the furnace. Soak for 20 minutes at temperature, and an additional 5 minutes per 25.4 mm of thickness, then remove from the furnace and cool in a free circulating air. Using this practice, sections up to approx. 101.6 mm square will harden to about Rockwell C 61/63. Sections 203.2 mm square can be hardened as high as Rockwell C 60; Stress relieving: First rough machine, then heat to a temperature of 649/677°C, and cool slowly.
PROPRIETARY Vega Tool Steel Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 1Referencias cruzadas
- 6Composición
- 11Propiedades mecánicas
- 12Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 1Proveedores Totales