B.S. S 15 Stale konstrukcyjne
Aktualizacje danych
Ten materiał ma 14 właściwości - tutaj pokazano tylko ich część.
Odblokuj pełne właściwości materiału, w tym szczegółowe wartości w różnych temperaturach i warunkach.
Wymagana bezpłatna rejestracja • Natychmiastowy dostęp
B.S. S 15 Skład chemiczny
BS 5S 15: 1964 / Specyfikacja dla stali do nawęglania z 3-procentową zawartością niklu
Szukasz pełnych danych o właściwościach materiałów?
Wymagana bezpłatna rejestracja • Natychmiastowy dostęp
B.S. S 15 Właściwości fizyczne
Temperatura
Ten materiał ma 14 właściwości - tutaj pokazano tylko ich część.
Odblokuj dostęp do szczegółowych wartości fizycznych w różnych temperaturach i warunkach.
Wymagana bezpłatna rejestracja • Natychmiastowy dostęp
B.S. S 15 Obróbka cieplna
- The final heat treatment shall be:
a) Carburize the parts and carburize or blank carburize the mechanical test samples at a temperature between 880°C and 930°C.
b) Refine at a temperature between 850°C and 880°C and cool in air, oil or water. c) Harden in water from a temperature between 760°C and 780°C.
Hardening may be followed by tempering at a temperature not exceeding 200°C. If agreed between the manufacturer and the purchaser and stated on the order, the carburized parts and mechanical test samples shall be hardened by quenching in oil. a) Carburize the parts and carburize or blank carburize the mechanical test samples at a temperature between 880°C and 930°C. b) Refine at a temperature between 850°C and 880°C and cool in air, oil or water. c) Harden in water from a temperature between 760°C and 780°C. Hardening may be followed by tempering at a temperature not exceeding 200°C. If agreed between the manufacturer and the purchaser and stated on the order, the carburized parts and mechanical test samples shall be hardened by quenching in oil.
B.S. S 15 Właściwości mechaniczne
Temperatura
Potrzebujesz kompletnych właściwości mechanicznych, aby dokonać właściwego wyboru?
Uzyskaj kompletne dane dotyczące wytrzymałości, twardości, zmęczenia i innych parametrów.
Wymagana bezpłatna rejestracja • Natychmiastowy dostęp
Zoptymalizuj dobór materiałów do swojego zastosowania - Umów się na prezentację
- -Odniesienia
- 7Skład Chemiczny
- 3Właściwości Mechaniczne
- 3Właściwości Fizyczne
- 1Obróbka Cieplna
- -Metalografia
- -Obrabialność
- -Naprężenie-Odkształcenie
- -Plastyczność
- -Zmęczenie materiału
- -Pęknięcie
- -Pełzać
- -Złącza
- -Powłoki
- -Wymiary
- -Trybologia
- -Korozja
- -Starzenie
- -Odporność na warunki atmosferyczne
- -Napromieniowanie
- -Łączna liczba dostawców