PROPRIETARY Böhler-Uddeholm Holder 構造・建築鋼
材料グループ:
鉄合金 / 構造・建築鋼
国 / 規格:
PROPRIETARY
データ更新
最新情報: 2017-07
更新の総数: 1
更新履歴
この材料には 14 件の特性データがありますが、現在表示されているのは一部のみです。
登録して、温度や条件ごとの詳細データを含む全ての材料特性データにアクセスしましょう。
全ての材料データを見る ›
無料登録・すぐにアクセス
無料登録・すぐにアクセス
PROPRIETARY Böhler-Uddeholm Holder 物理的性質
温度
この材料には 14 件の特性データがありますが、現在表示されているのは一部のみです。
温度や条件ごとの詳細な物理データを閲覧
全ての材料データを見る ›
無料登録・すぐにアクセス
無料登録・すぐにアクセス
PROPRIETARY Böhler-Uddeholm Holder 熱処理
- It is intended for use in the hardened and tempered condition, i.e., the delivery condition.
Stress Tempering: After rough machining, the tool should be heated through to 900°F, and held for a minimum of 2 hours once the entire tool is soaked through. Cool slowly to room temperature. Stress tempering temperatures in excess of 900°F may result in a permanent loss of strength, hardness, and/or dimensional tolerances.
Flame and induction hardening: Can be flame or induction hardened to a hardness of approx. 50 RC. Cooling in air is preferable. Smaller pieces may however require forced cooling. Hardening should be immediately followed by tempering.
Gasnitriding: Nitriding gives a hard surface which is very resistant to wear and erosion. A nitrided surface also increases the corrosion resistance. The surface hardness after nitriding at a temperature of 525°C in ammonia gas will be approx. 650HV.
PROPRIETARY Böhler-Uddeholm Holder 機械的特性
温度
ブリネル硬さ (HB)
val1
無料アクセスで全データをご利用いただけます
全ての材料データを見る
登録して全ての詳細データを表示
無料アクセスで全データをご利用いただけます
全ての材料データを見る
降伏強度, Rp0.2
登録して全ての詳細データを表示
無料アクセスで全データをご利用いただけます
全ての材料データを見る
用途に最適な材料を選定 - デモを予約
- -相互参照
- -成分
- 9機械的特性
- 3物理的特性
- 1熱処理
- -金属組織
- -被削性
- -応力-ひずみ
- -成形性
- -疲労
- -破壊
- -クリープ
- -接合
- -コーティング
- -寸法
- -トライボロジ
- -腐食
- -時効
- -耐候性
- -照射
- 1総仕入先数