ISO SS Type 2 Acciaio inox
Aggiornamenti dei dati
Questo materiale dispone di 157 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca tutte le proprietà del materiale, inclusi i valori dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
ISO SS Type 2 Composizione chimica
ISO 683-16: 1976 / Acciai trattabili a caldo, acciai legati e acciai lavorabili ad alta velocità - parte 16: invecchiamento artificiale di acciaio inox
Cerchi dati completi sulle prestazioni dei materiali?
Registrazione gratuita richiesta • Accesso immediato
ISO SS Type 2 Proprietà fisiche
Temperatura
Questo materiale dispone di 157 dati sulle proprietà — qui ne viene mostrato solo un sottoinsieme.
Sblocca valori fisici dettagliati a diverse temperature e condizioni.
Registrazione gratuita richiesta • Accesso immediato
ISO SS Type 2 Trattamento Termico
- Bars, forgings and wire rods:
Solution treated (ST): 1065 ± 15°C, cool in air or oil
Precipitation hardened (R 127): 955 ± 10°C, for 10 minutes, cool rapidly to 20°C max, cool within 1 h to - 70°C max, hold not less than 8 h, warm in air to room temperature. Heat to 510 ± 10°C, hold 1 h, cool in air.
Precipitation hardened (R 117): 760 ± 10°C for 90 minutes, cool to 20°C max within 1 h, hold not less than 30 minutes. Heat to 565 ± 10°C for 90 minutes, cool in air.
Wire:
CW: No treatment, as cold worked.
Solution treated (ST): 1040 ± 15°C, cool in air or oil.
Precipitation hardened (R 172): 480 ± 10°C, for 1 h, cool in air.
Precipitation hardened (R 127): 955 ± 10°C, for 10 minutes, cool rapidly to 20°C max, cool within 1 h to - 70°C max, hold not less than 8 h, warm in air to room temperature. Heat to 510 ± 10°C, hold 1 h, cool in air.
Precipitation hardened (R 117): 760 ± 10°C for 90 minutes, cool to 20°C max within 1 h, hold not less than 30 minutes. Heat to 565 ± 10°C for 90 minutes, cool in air.
Sheet and strip:
CW: No treatment, as cold worked.
Solution treated (ST): 1040 ± 15°C, cool in air or oil.
Precipitation hardened (R 165): 480 ± 10°C, for 1 h, cool in air.
Precipitation hardened (R 145): 955 ± 10°C, for 10 minutes, cool rapidly to 20°C max, cool within 1 h to - 70°C max, hold not less than 8 h, warm in air to room temperature. Heat to 510 ± 10°C, hold 1 h, cool in air.
Precipitation hardened (R 124): 760 ± 10°C for 90 minutes, cool to 20°C max within 1 h, hold not less than 30 minutes. Heat to 565 ± 10°C for 90 minutes, cool in air.
Plates:
Solution treated (ST): 1040 ± 15°C, cool in air or oil
Precipitation hardened (R 145): 955 ± 10°C, for 10 minutes, cool rapidly to 20°C max, cool within 1 h to - 70°C max, hold not less than 8 h, warm in air to room temperature. Heat to 510 ± 10°C, hold 1 h, cool in air.
Precipitation hardened (R 124): 760 ± 10°C for 90 minutes, cool to 20°C max within 1 h, hold not less than 30 minutes. Heat to 565 ± 10°C for 90 minutes, cool in air.
ISO SS Type 2 Proprietà meccaniche
Temperatura
Hai bisogno di proprietà meccaniche complete per fare la scelta giusta?
Accedi ai dati completi su resistenza, durezza, fatica e altro ancora.
Registrazione gratuita richiesta • Accesso immediato
Materiali equivalenti internazionali di ISO SS Type 2
Visualizzazione di 1 risultati su 100.
Le categorie di equivalenza si basano sul confronto della composizione chimica e delle proprietà meccaniche. Si raccomanda di verificare sempre l'idoneità del materiale rispetto alla specifica e all'applicazione prevista.
Hai bisogno dell'elenco completo dei 100 equivalenti internazionali?
Visualizza tutti i 100 gradi equivalenti con una mappatura dettagliata per norma, produttore e categoria di equivalenza.
Registrazione gratuita richiesta • Accesso immediato
Ottimizza la selezione dei materiali per la tua applicazione - Prenota una demo
- 100Riferimenti incrociati
- 9Composizione
- 44Proprietà meccaniche
- 3Proprietà fisiche
- 1Trattamento Termico
- -Metallografia
- -Lavorabilità
- -Sforzo-Deformazione
- -Formabilità
- -Fatica
- -Frattura
- -Strisciare
- -Giunzioni
- -Rivestimenti
- -Dimensioni
- -Tribologia
- -Corrosione
- -Invecchiamento
- -Resistenza agli agenti atmosferici
- -Irraggiamento
- -Fornitori Totali