Generic Ti-46Al-8Ta Alliages de titane
Mises à jour des données
Ce matériau a 4367 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
Generic Ti-46Al-8Ta Composition chimique
Microstructure and properties of cast Ti-46Al-8Ta alloy, Juraj Lapin, Zuzana Gabalcova, Oto Bajana, Tatiana Pelachova, Hana Stanekova, Katarina Frkanova, Institute of Materials and Machine Mechanics, Slovak Academy of Sciences,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
Generic Ti-46Al-8Ta Propriétés physiques
Température
Ce matériau a 4367 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
Generic Ti-46Al-8Ta Traitement thermique
- The ingot was subjected to hot isostatic pressing (HIP) at a temperature of 1280°C and pressure of 190 MPa for 4 h to remove cast porosity.
After HIP-ing the ingot was prepared for Jominy end quench test. Before quenching the Jominy sample was solution annealed at a temperature of 1360°C for 1 h in a dynamic argon atmosphere.
The samples for tensile and compression testing were solution annealed at 1360°C for 1 h and air cooled to room temperature. This heat treatment was finalized by annealing at a temperature of 1360°C or 1260°C for 10 min followed by cooling to room temperature at a rate of 10°C/min.
Generic Ti-46Al-8Ta Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- -Références croisées
- 3Composition
- 77Propriétés mécaniques
- 2Propriétés physiques
- 1Traitement thermique
- 1Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- 4283Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- -Fournisseurs totaux