PROPRIETARY VCM Acier pour outils
Mises à jour des données
Ce matériau a 147 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY VCM Composition chimique
Villares Metals, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY VCM Propriétés physiques
Température
Ce matériau a 147 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY VCM Traitement thermique
- Recommendations to improve tool life: Preheat slowly between 200 and 300°C before starting operation. Carry out periodic stress relief throughout the tool life.
Stress relief: Must be performed after machining and before hardening. The relief procedure should involve slow heating to temperatures between 500 and 600°C and oven cooling to a temperature of 200°C. If applied after work, stress relief must be carried out at a temperature 50°C lower than the temperature of the last temper.
Quenching: Heating for quenching should be between 1010 and 1030°C. It is recommended to pre-warm the tools.
Cool in:
a) suitable oil with agitation and heated to between 40 and 70°C.
b) salt bath kept at 500/550°C.
Tempering: The tools must be tempered immediately after tempering, as soon as they reach 60°C. Make at least 3 tempers and between each temper the parts must cool slowly to room temperature. Tempering temperatures should be chosen according to the desired hardness. The time of each tempering must be at least 2 hours. For pieces larger than 70 mm, the time must be calculated as a function of their dimension. Allow 1 hour for each inch of thickness.
Nitriding: It must be carried out after quenching and tempering, as long as the nitriding temperature is at least 50°C lower than the temperature of the last tempering.
PROPRIETARY VCM Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
PROPRIETARY VCM Matériaux équivalents internationaux
Affichage de 15 sur 67 résultats.
Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.
Besoin de la liste complète des 67 équivalents internationaux ?
Consultez les 67 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 67Références croisées
- 4Composition
- 1Propriétés mécaniques
- 13Propriétés physiques
- 2Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 60Fournisseurs totaux