PROPRIETARY BÖHLER M201 Acier pour outils
Mises à jour des données
Ce matériau a 72 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY BÖHLER M201 Composition chimique
Böhler Edelstahl, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY BÖHLER M201 Propriétés physiques
Température
Ce matériau a 72 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY BÖHLER M201 Traitement thermique
- Normalizing at 850 to 900°C / Air cooling;
Annealing at 720 to 740°C. Slow controlled cooling in furnace at a rate of 10 to 20°C/hr down to approx. 600°C, further cooling in air. Hardness after annealing: max. 230 HB.
Stress relieving at approx. 600°C.In hardened and tempered condition approx. 30 to 50°C below the tempering temperature. After through heating, hold at temperature in neutral atmosphere for 1 to 2 hours / slow cooling in furnace.
Hardening at 840 to 860°C / oil or at 860 to 880 °C / air. After through soaking, hold for 15 to 30 minutes. Obtainable hardness: approx. 55 HRC.
Tempering: Slow heating to tempering temperature immediately after hardening / time in furnace: 1 hour for each 20 mm of workpiece thickness, but at least 2 hours / cooling in air. For average hardness values after tempering please refer to the tempering chart.
Surface treatment: Nitriding: Variation of hardness. Gas nitriding in a stream of ammonia 50 hours at 520°C. Bath nitriding ( Tufftride-process ) 2 hours at 570°C.
PROPRIETARY BÖHLER M201 Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
PROPRIETARY BÖHLER M201 Matériaux équivalents internationaux
Affichage de 15 résultats sur 26.
Les catégories d'équivalence reflètent la comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation avec la spécification applicable à votre application.
Besoin de la liste complète des 26 équivalents internationaux ?
Consultez les 26 nuances équivalentes avec une cartographie détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 26Références croisées
- 5Composition
- 1Propriétés mécaniques
- 16Propriétés physiques
- 1Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 23Fournisseurs totaux