PROPRIETARY Carpenter CTS BDZ1 Alloy Aciers inoxydables
Mises à jour des données
Ce matériau a 110 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY Carpenter CTS BDZ1 Alloy Composition chimique
Carpenter Technology Corporation, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY Carpenter CTS BDZ1 Alloy Propriétés physiques
Température
Ce matériau a 110 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY Carpenter CTS BDZ1 Alloy Traitement thermique
- Annealing: alloy should be annealed in a neutral atmosphere. Heat uniformly to 843–871°C (1550–1600°F), then cool very slowly in the furnace until the furnace is black. The furnace can then be turned off and allowed to cool naturally. Fully annealed hardness is HRB 100 maximum.
Hardening: Preheat to 760–816°C (1400–1500°F) then increase temperature to 1038–1066°C (1900–1950°F), soak for 15 to 30 minutes, quench in warm oil or cool in air. Do not overheat.
Tempering: over a range of temperatures from 149°C to 427°C (300–800°F), soaked at least one hour then air cooled to room temperature. The specific tempering treatment chosen will depend upon a number of factors including the austenitizing temperature utilized, application of a refrigeration treatment and the desired combination of final hardness, toughness and corrosion resistance (see hardness table). To remove peak stresses, yet retain peak hardness, temper at 149–177°C (300–350°F).
Tempering at temperatures of 427°C and higher (800°F and higher) will reduce toughness and corrosion resistance.
Sub-Zero Cooling: After hardening, the alloy may be refrigerated at -73 to -84°C (-100 to -120°F) for at least one hour then warmed to room temperature prior to tempering to minimize retained austenite. Refrigeration is most effective when performed within two hours after the austenitizing treatment.
PROPRIETARY Carpenter CTS BDZ1 Alloy Matériaux équivalents internationaux
Affichage de 9 sur 50 résultats.
Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.
Besoin de la liste complète des 50 équivalents internationaux ?
Consultez les 50 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 50Références croisées
- 8Composition
- -Propriétés mécaniques
- 4Propriétés physiques
- 1Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 47Fournisseurs totaux