PROPRIETARY VWM2 Acier pour outils
Mises à jour des données
Ce matériau a 360 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY VWM2 Composition chimique
Villares Metals, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY VWM2 Propriétés physiques
Température
Ce matériau a 360 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY VWM2 Traitement thermique
- Annealing: Soft annealing should be carried out by heating between 850 and 880°C for 2 hours, followed by slow cooling at 10/20°C per hour until 650°C and, then, by air cooling. In this treatment, the use of protective atmosphere is important to avoid surface decarburization.
Stress relieving: The indicated procedure is heating between 600 and 700°C and holding until complete homogenization, followed by slow cooling (air or furnace) at least down to 500°C.
Hardening and Tempering:
Application:
Cutting tools: Hardening (1180-1220°C) and Tempering (560°C).
Cold work dies: Hardening (1080-1160°C) and Tempering (560°C).
Hardening procedure must involve pre-heating at 400/500°C followed by other at 860/880°C. For large tools, it is also recommended another pre-heating at 1050°C. After pre-heating, hardening at suitable austenitizing temperature may be conducted, followed by quenching down to room temperature. A protective atmosphere is absolutely necessary. Double tempering treatments, of at least 2h, are required and after each one tools must cool down to room temperature.
Surface treatments: If nitriding is applied, the treatment temperature should be lower than the tempering temperature, to avoid decrease of core hardness. It is important that, before all surface treatments, tools have clean surface (without oil or grease) and are free from grinding overheating.
PROPRIETARY VWM2 Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
PROPRIETARY VWM2 Matériaux équivalents internationaux
Affichage de 15 résultats sur 180.
Les catégories d'équivalence reflètent la comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation avec la spécification applicable à votre application.
Besoin de la liste complète des 180 équivalents internationaux ?
Consultez les 180 nuances équivalentes avec une cartographie détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 180Références croisées
- 5Composition
- 3Propriétés mécaniques
- 13Propriétés physiques
- 2Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 157Fournisseurs totaux