PROPRIETARY SMV5W Acier pour outils
Mises à jour des données
Ce matériau a 45 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY SMV5W Composition chimique
Aubert & Duval, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY SMV5W Propriétés physiques
Température
Ce matériau a 45 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY SMV5W Traitement thermique
- Annealing
850°C followed by slow cooling
Quenching:
- preheating to 700°C,
- heating to 1000°C,
- quenching in air or under gas pressure, (for massive massive parts, air quenching can be replaced by quenching in a salt bath at 220°C followed by air cooling).
- It is recommended that heating be carried out in an inert atmosphere.
Tempering: to obtain maximum hardness, it is necessary to to perform 2 successive tempering at 520°C. - Tempered: Pre-heated to 750°C; Heated to 1000°C; Air cooled or pressure gas cooled. For very thick parts, air cooling can be replaced by quenching in a salt bath at 220°C, followed by a stop in the air. It is recommended to carry out the heating under neutral atmosphere.
Austenitization at 1000°C; First tempering at 520°C; Second tempering for obtaining desired hardness.
PROPRIETARY SMV5W Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 3Références croisées
- 15Composition
- 9Propriétés mécaniques
- 11Propriétés physiques
- 3Traitement thermique
- 2Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 2Fournisseurs totaux