PROPRIETARY BÖHLER K190 Microclean Aciers inoxydables
Mises à jour des données
Ce matériau a 51 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY BÖHLER K190 Microclean Composition chimique
Böhler Edelstahl, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY BÖHLER K190 Microclean Propriétés physiques
Température
Ce matériau a 51 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY BÖHLER K190 Microclean Traitement thermique
- Annealing: 800-850°C (1472-1562°F) Slow, controlled cooling in furnace at a rate of 10 to 20°C/hr (18 to 36°F/hr) down to approx. 600°C (1112°F), further cooling in air.
Stress relieving: 650-700°C (1202-1292°F) After through-heating, soak for 1 to 2 hours in neutral atmosphere. Slow cooling in furnace.
Hardening and tempering: 1050-1150°C (1922-2102°F); Vacuum hardening is recommended. Alternative: quenching from a neutral atmosphere in oil, salt bath 220 to 250°C or 500 to 550°C (428 to 482°F or 932 to 1022°F), gas, air. A sufficiently high cooling rate must be ensured. Holding time after temperature equalization: 20 to 30 minutes. Soaking time depends on the size of the workpiece and furnace parameters. We recommend hardening from the lower end of the hardening temperature range when high toughness is required and/or when the tool is of complex shape. If high wear resistance is of the utmost importance, we recommend hardening from the top end of the hardening temperature range. After hardening, tempering to the desired working hardness according to the tempering chart.
PROPRIETARY BÖHLER K190 Microclean Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
PROPRIETARY BÖHLER K190 Microclean Matériaux équivalents internationaux
Affichage de 1 sur 3 résultats.
Les catégories d'équivalence reflètent une comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation par rapport à la spécification applicable à votre utilisation.
Besoin de la liste complète des 3 équivalents internationaux ?
Consultez les 3 nuances équivalentes avec une correspondance détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 3Références croisées
- 6Composition
- 22Propriétés mécaniques
- 14Propriétés physiques
- 1Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 5Fournisseurs totaux