PROPRIETARY No. 484 Tool Steel Acier pour outils
Mises à jour des données
Ce matériau a 37 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY No. 484 Tool Steel Composition chimique
Carpenter Technology Corporation, Product Data Sheets,
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
PROPRIETARY No. 484 Tool Steel Propriétés physiques
Température
Ce matériau a 37 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
PROPRIETARY No. 484 Tool Steel Traitement thermique
- Annealing: Heat uniformly to 843 - 871°C (1550 - 1600°F) and cool very slowly in the furnace at a rate of not more than 11°C (20°F) per hour until the furnace is black. The furnace may then be turned off an allowed to cool naturally.
Hardening: placing in a furnace maintained at a temperature of 940 - 969°C (1725 - 1775°F). Let the tools heat naturally to the furnace temperature, soak for 20 minutes plus 5 minutes per 25.4 mm of thickness and air quench.
Stress Relieving: first rough machine, then heat to a temperature of 649 - 677°C (1200 - 1250°F) for a minimum of one hour at temperature and cool slowly. After cooling, parts may be finish machined.
Tempering: the best combination of hardness and toughness is obtained by tempering at 204°C (400°F). For greater ductility with some sacrifice in hardness, temper at 371°C (700°F).
PROPRIETARY No. 484 Tool Steel Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 2Références croisées
- 7Composition
- 13Propriétés mécaniques
- 13Propriétés physiques
- 1Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 1Fournisseurs totaux