ASTM A 439 Type D-4 Fontes
Mises à jour des données
Ce matériau a 4495 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
ASTM A 439 Type D-4 Composition chimique
A439/A439M: 2018 / Norme de spécification pour les pièces en fonte moulée ductile austénitique
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
ASTM A 439 Type D-4 Traitement thermique
- By agreement between the manufacturer and the purchaser:
Stress relieving by heating to 620 to 650°C (1150 to 1200°F) for not less than 1h and not for more than 2h per 25 mm (1 inch) of thickness in the thickest section. Heating and cooling shall be uniform and shall not be more than 222°C/h (400°F/h) for castings less than 25 mm (1 inch) in maximum thickness and shall be not more than 222°C/h (400°F/h) divided by the maximum section thickness in 25 mm (1 inch) for thicker castings. During the cooling cycle, castings may be cooled in still air after the temperature has dropped to 310°C (600°F).
In-mold stress relieving by allowing castings to cool slowly in the mold at a rate not exceeding 222°C/h (400°F/h). Once the temperature has dropped below 310°C (600°F), castings can be removed from the mold and cooled in still air.
Stabilizing by heating at 870°C (1600°F) for a period of 1 h per 25 mm (1 inch) of section, with a minimum period of 1 h, followed by uniform cooling, preferably in still air, whenever dimensional changes in high-temperature service are a problem.
Annealing, for castings with chilled edges or excessive carbides, at 960 to 1040°C (1750 to 1900°F) for 0.5 h to 5 h followed by uniform cooling, preferably in still air.
ASTM A 439 Type D-4 Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
ASTM A 439 Type D-4 Matériaux équivalents internationaux
Affichage de 15 résultats sur 71.
Les catégories d'équivalence reflètent la comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation avec la spécification applicable à votre application.
Besoin de la liste complète des 71 équivalents internationaux ?
Consultez les 71 nuances équivalentes avec une cartographie détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 71Références croisées
- 6Composition
- 2Propriétés mécaniques
- -Propriétés physiques
- 1Traitement thermique
- -Métallographie
- 1Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- 4348Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 66Fournisseurs totaux