ASTM A 436 Type 4 Fontes
Mises à jour des données
Ce matériau a 4456 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
ASTM A 436 Type 4 Composition chimique
A436: 2024 / Norme de spécification pour pièces moulées en fonte grise austénitique
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
ASTM A 436 Type 4 Traitement thermique
- Stress relieved by heating to and holding in the temperature range from 620 to 650°C (1150 to 1200°F) for not less than 1 nor more than 2 h/25 mm of thickness in the thickest section. Heating and cooling shall be uniform and shall be not more than 222°C (400°F))/h for castings less than 25 mm in maximum thickness, nor more than 222°C (400°F))/h divided by the maximum section thickness in mm for thicker castings. During the cooling cycle, castings may be cooled in still air after the temperature has dropped to 315°C (600°F).
Castings may be stabilized by heating at 870°C (1600°F) for 1 h/25 mm of section, for a minimum of 1 h.
Castings with chilled edges or excessive carbides may be annealed at 955 to 1040°C (1750 to 1900°F) for 1/2 to 5 h, followed by uniform cooling, preferably in still air.
ASTM A 436 Type 4 Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
ASTM A 436 Type 4 Matériaux équivalents internationaux
Affichage de 5 résultats sur 84.
Les catégories d'équivalence reflètent la comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation avec la spécification applicable à votre application.
Besoin de la liste complète des 84 équivalents internationaux ?
Consultez les 84 nuances équivalentes avec une cartographie détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 84Références croisées
- 7Composition
- 2Propriétés mécaniques
- 1Propriétés physiques
- 1Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- 1Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- 4355Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 5Fournisseurs totaux