ASTM A 333 Grade 8 Aciers de construction
Mises à jour des données
Ce matériau a 340 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
ASTM A 333 Grade 8 Composition chimique
A333/A333M: 2024 / Norme de spécification pour tuyau en acier sans soudure et soudé pour usage à basse température et d’autres applications avec la résistance à l’effet d’entaille requise
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
ASTM A 333 Grade 8 Propriétés physiques
Température
Ce matériau a 340 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
ASTM A 333 Grade 8 Traitement thermique
- Quenched and tempered: Heat to a uniform temperature of 800 ± 15°C (1475 ± 25°F); hold at this temperature for a minimum time in the ratio of 2 min/mm of thickness, but in no case less than 15 min; quench by immersion in circulating water. Reheat until the pipe attains a uniform temperature within the range from 565 to 605°C (1050 to 1125°F); hold at this temperature for a minimum time in the ratio of 2 min/mm of thickness, but in no case less than 15 min; cool in air or water quench at a rate no less than 167°C (300°F)/h.
Double normalized and tempered: Heat to a uniform temperature of 900 ± 15°C (1650 ± 25°F); hold at this temperature for a minimum time in the ratio of 2 min/ mm of thickness, but in no case less than 15 min; cool in air. Reheat until the pipe attains a uniform temperature of 790 ± 15°C (1450 ± 25°F); hold at this temperature for a minimum time in the ratio of 2 min/mm of thickness, but in no case less than 15 min; cool in air. Reheat to a uniform temperature within the range from 565 to 605°C (1050 to 1125°F); hold at this temperature for a minimum time of 2 min/mm of thickness but in no case less than 15 min; cool in air or water quench at a rate not less than 167°C (300°F)/h.
Stress Relleving at 550 to 585°C (1025 to 1085°F), held for a minimum time of 2 h for thickness up to 25.4 mm, plus a minimum of 1h for each additional 25.4 mm of thickness and cooled at a minimum rate of 167°C (300°F)/h in air or water to a temperature not exceeding 315°C (600 °F).
ASTM A 333 Grade 8 Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
ASTM A 333 Grade 8 Matériaux équivalents internationaux
Affichage de 15 résultats sur 163.
Les catégories d'équivalence reflètent la comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation avec la spécification applicable à votre application.
Besoin de la liste complète des 163 équivalents internationaux ?
Consultez les 163 nuances équivalentes avec une cartographie détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 163Références croisées
- 7Composition
- 30Propriétés mécaniques
- 3Propriétés physiques
- 1Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- 3Assemblages
- -Revêtements
- 3Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 130Fournisseurs totaux