SS 2723 Acier pour outils
Mises à jour des données
Ce matériau a 202 entrées de propriétés – seul un aperçu est visible ici.
Déverrouillez l’accès aux propriétés détaillées du matériau, notamment en température et dans différentes conditions.
Inscription gratuite requise • Accès instantané
SS 2723 Composition chimique
SS 142723: 1989 / Acier à outils - Acier rapide - Acier de coupe et acier pour travail à froid - Acier SS 27 23
Vous souhaitez voir toutes les données sur ce matériau ?
Inscription gratuite requise • Accès instantané
SS 2723 Propriétés physiques
Température
Ce matériau a 202 entrées de propriétés – seul un aperçu est visible ici.
Déverrouiller l’accès aux propriétés physiques à différentes températures et conditions.
Inscription gratuite requise • Accès instantané
SS 2723 Traitement thermique
- Full annealing: Normally 850°C, time at temperature, approx. 2 h with protection against decarburization and oxidation. Cooling time 10 K/h (10°C/h) to approx. 650°C, then cooling in air.
Stress-relief annealing: Normally 650°C, time at temperature, approx. 2 h. Cooling in the furnace to approx. 500°C, then cooling in air (with subsequent checking of dimensions, straightening and final machining).
Hardening: Preheating, usually in two steps, normally first to 550°C in a convection furnace, then to 850°C in a salt bath.
Austenitizing for cutting tools, 1180-1220°C in a salt bath.
Austenitizing for shearing and shaping tools, 1050-1150°C in a salt bath.
Cooling normally to approx. 550°C in a salt bath, then cooling in air (possibly cooling in oil) to approx. 50°C.
Hardening may be carried out in a vacuum furnace if absolute maximum hardness is not aimed at.
Tempering: Tempering normally in a convection furnace or a salt bath at 550°C, time at temperature 1 h, two times with an intermediate cooling in air to room temperature.
SS 2723 Propriétés mécaniques
Température
Vous avez besoin des propriétés mécaniques détaillées pour faire le bon choix ?
Accédez aux données complètes de résistance, dureté, fatigue et plus encore.
Inscription gratuite requise • Accès instantané
SS 2723 Matériaux équivalents internationaux
Affichage de 15 résultats sur 99.
Les catégories d'équivalence reflètent la comparaison de la composition chimique et des propriétés mécaniques — vérifiez toujours l'adéquation avec la spécification applicable à votre application.
Besoin de la liste complète des 99 équivalents internationaux ?
Consultez les 99 nuances équivalentes avec une cartographie détaillée par norme, producteur et catégorie d'équivalence.
Inscription gratuite requise • Accès instantané
Optimisez les choix de matériaux pour votre application - Réserver une démo
- 99Références croisées
- 10Composition
- 2Propriétés mécaniques
- 3Propriétés physiques
- 1Traitement thermique
- -Métallographie
- -Usinabilité
- -Contrainte-Déformation
- -Formabilité
- -Fatigue
- -Rupture
- -Rampant
- -Assemblages
- -Revêtements
- -Dimensions
- -Tribologie
- -Corrosion
- -Vieillissement
- -Résistance aux intempéries
- -Irradiation
- 87Fournisseurs totaux