PROPRIETARY Pyromet Alloy 41 Nickel Alloys
Actualizaciones de datos
Este material cuenta con 91 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Pyromet Alloy 41 Composición química
Carpenter Technology Corporation, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Pyromet Alloy 41 Propiedades físicas
Temperatura
Este material cuenta con 91 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Pyromet Alloy 41 Tratamiento Térmico
- Solution treated at 1066°C, 4 hours, air cooled and aged at 760°C, 16 hours, air cooled. Solution temperatures: gamma prime solvus temp 1071/1082°C, M6C carbide 1149°C and higher, M23C6 carbide 982°C and higher. If fine grain size and best tensile ductility are desired, the solution treatment should be executed in the range of 1038/1052°C, hold 4 hours at temperature, then air cool. If the M6C carbide, normally present in this alloy, is solutioned by treating above 1149°C, it will precipitate during cooling or aging as M23C6, a continuous grain boundary film which results in low ductility. Resolutioning - at least 982°C and preferably 1038°C - is required to restore ductility by reforming M6C. Precipitation hardening treatment: heat to 760°C, hold at heat for 16 hours, then air cool. Hardness will be in the Rockwell C 40/45 range. Lowest hardness is obtained by quenching from temperatures above the gamma prime solvus temperature 1066°C is usually satisfactory. In some cases it may be desirable to anneal at lower temperatures, but preferably not lower than 982°C.
PROPRIETARY Pyromet Alloy 41 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY Pyromet Alloy 41 Materiales equivalentes internacionales
Mostrando 9 de 11 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 11 equivalentes internacionales?
Consulte los 11 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 11Referencias cruzadas
- 11Composición
- 24Propiedades mecánicas
- 26Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- 4Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- 1Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- 1Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 12Proveedores Totales