NBR 6351 Aleaciones de aluminio
Actualizaciones de datos
Este material cuenta con 266 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
NBR 6351 Composición química
NBR 15197: 2011 / Aleaciones de aluminio - planchas, formas y remaches para carrocería de furgoneta - requisitos
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
NBR 6351 Propiedades físicas
Temperatura
Este material cuenta con 266 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
NBR 6351 Tratamiento Térmico
- Recommended homogenization treatment at 530-570 (+/- 10°C) The tolerance range of the selected treatment temperature should be used when the table of temperature variation range is greater than 20°C. 4h treatment time refers to the time when the core material should remain on the set temperature. This time should be adjusted according to the size and load characteristics to be treated and the homogenizing furnace. In this time, it should be added that the time required for all furnace data points indicating the lower limit of the treatment group (recovery time) for any load mass reaches that temperature. These times are determined based on thermal surveys of equipment and size of specific load. Higher temperatures for the materials to be solubilized in a press and lower for materials for solu-bilization in the oven.
NBR 6351 Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
NBR 6351 Materiales equivalentes internacionales
Mostrando 15 de 124 resultados.
Las categorías de equivalencia reflejan la comparación de composición química y propiedades mecánicas — verifique siempre la idoneidad según la especificación aplicable a su aplicación.
¿Necesita la lista completa de 124 equivalentes internacionales?
Consulte los 124 grados equivalentes con mapeo detallado por norma, productor y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 124Referencias cruzadas
- 70Composición
- 60Propiedades mecánicas
- 3Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- 6Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 2Proveedores Totales