PROPRIETARY CarTech CTS B70P Alloy Aceros inoxidables
Actualizaciones de datos
Este material cuenta con 47 propiedades — aquí solo se muestra una parte.
Accede a todas las propiedades del material, incluyendo valores detallados según temperatura y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CarTech CTS B70P Alloy Composición química
Carpenter Technology Corporation, Product Data Sheets,
¿Buscas datos completos de desempeño de materiales?
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CarTech CTS B70P Alloy Propiedades físicas
Temperatura
Este material cuenta con 47 propiedades — aquí solo se muestra una parte.
Consulta propiedades físicas detalladas en distintas temperaturas y condiciones.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CarTech CTS B70P Alloy Tratamiento Térmico
- Annealing: Should be annealed in a neutral atmosphere. Heat uniformly at 871-899°C (1600-1650°F) then cool very slowly in the furnace at a rate of not more than 11°C (20°F) per hour until the furnace is black. The furnace can then be turned off and allowed to cool naturally.
Hardening: Preheat at 760-816°C (1400-1500°F) then increase temperature to 1093-1149°C (2000-2100°F), soak for 30 minutes, quench in warm oil or cool in air. Do not overheat.
Tempering: Can be tempered over a range of temperatures from 149-427°C (300-800°F), soaked at least one hour then air cooled to room temperature. The specific tempering treatment chosen will depend upon a number of factors including the austenitizing temperature utilized, application of a refrigeration treatment and the desired combination of final hardness, toughness and corrosion resistance. Tempering at 427-593°C (800-1100°F) will reduce toughness and corrosion resistance.
Sub-zero cooling: After hardening, the alloy should be refrigerated at -73/-84°C (-100/-120°F) for at least one hour then warmed to room temperature prior to tempering to minimize retained austenite. Refrigeration is most effective when performed within 2 hours after the austenitizing treatment. The benefit of refrigeration is more apparent with austenitizing temperatures above 1093°C (2000°F).
PROPRIETARY CarTech CTS B70P Alloy Propiedades mecánicas
Temperatura
¿Buscas información completa sobre propiedades mecánicas para tomar la mejor decisión?
Obtén información completa sobre resistencia, dureza, fatiga y más.
Se requiere registro gratuito • Acceso inmediato
PROPRIETARY CarTech CTS B70P Alloy Materiales Internacionales Equivalentes
Mostrando 1 de 2 resultados.
Las categorías de equivalencia reflejan comparaciones de composición química y propiedades mecánicas; siempre verifique la idoneidad del material según la especificación aplicable a su aplicación.
¿Necesita la lista completa de los 2 internacionales equivalentes?
Consulte los grados 2 equivalentes con el detalle completo de correspondencias por norma, fabricante y categoría de equivalencia.
Se requiere registro gratuito • Acceso inmediato
Optimiza la selección de materiales para tu aplicación - Reservar una demo
- 2Referencias cruzadas
- 10Composición
- 29Propiedades mecánicas
- 4Propiedades físicas
- 1Tratamiento térmico
- -Metalografía
- -Maquinabilidad
- -Esfuerzo-Deformación
- -Conformabilidad
- -Fatiga
- -Fractura
- -Bicho raro
- -Uniones
- -Revestimientos
- -Dimensiones
- -Tribología
- -Corrosión
- -Envejecimiento
- -Resistencia a la intemperie
- -Irradiación
- 1Proveedores Totales